Zalman ZM-GWB8800GT/GTS [11/13] Tension control of the vga water block

※

The specifications of any product may change without prior notice to improve performance.

Note

·Check to see if the Water Block’s base side is in proper contact with the

VGA chipset before finishing the installation.

·Assembling the Springs with the Nuts prior to installation will ease the

installation process.

Nut

Spring

PVC Washer

PVC Tube

Fitting

5) Tension Control of the VGA Water Block

Tighten/loosen the Nuts on the back side of the VGA card to control the

tension between the VGA Water Block and the VGA Chipset.

Note

·If the Nuts are turned too tightly, then the VGA chipset or VGA card may

get damaged.

·Fully tightening one Nut at a time may result in damaging the VGA

Chipset. Please tighten each Nut one rotation at a time until all are

completely tightened.

·Make sure that the VGA Water Block does not interfere with the VGA

cooler, capacitors, and other components of the VGA card.

6) FET Water Block Connection (ZM-GWB3850/3870)

Cut the enclosed PVC Tube to the appropriate Tube Length and install

onto its Fittings as shown in the diagrams below.

Note

·Tube Length

- Radeon HD 3850 VGA : 65mm

- Radeon HD 3870 VGA : 50mm