Zalman ZM-WB4 Gold [5/8] Installation

※

The specifications of any product may change without prior notice to improve performance.

5. Installation

1) Intel Pentium 4 -775

①①

Install Clip Supports for Socket 775

Align the clip support for socket 775 and the backplate for socket 775 with the mounting holes on the motherboard and

fasten them together using the clip support fixing bolt. The lever slot on the clip support should be properly oriented

on the hinged side of the socket lever when installing.

②②

Install Clip

Align the Clip’s holes with the Waterblock tabs as shown in

the diagram, and install the Clips by slowly screwing the Clip

Bolts into the Clip holes. Hold the Clips with one hand, and

install with slight hand motions for easy installation.

③③

Apply Thermal Grease

Clean the contact surface of the CPU completely.

Apply Thermal Grease on the CPU surface that makes

contact with the base of the Water Block.

④④

Install CPU Water Block

Set the CPU Water Block at the center of the CPU.

Screw the Bolts in slightly, then tighten each Bolt a few

turns at a time while alternating between the two until the

Clips are completely pressed against the Clip Support.

CPUCPUCPU

Clip Support Fixing Bolt

Clip Support for Socket 775

Motherboard

Backplate for Socket 775

Socket Lever

Lever Slot

Socket Lever

Clip

Clip Bolt

Thermal Grease