KIWI KHAG-4114 Руководство по эксплуатации онлайн [4/68] 876498

SAFETY WARNINGS FOR DEVICE

• This power tool is intended to function as a grinder, sander, wire brush or cut-

off tool. Read all safety warnings, instructions, illustrations and specifications

provided with this power tool. Failure to follow all instructions listed below may

result in electric shock, fire and/or serious injury.

• Operations such as polishing are not recommended to be performed with this

power tool. Operations for which the power tool was not designed may create a

hazard and cause personal injury.

• Do not use accessories which are not specifically designed and recommended

by the tool manufacturer. Just because the accessory can be attached to your

power tool, it does not assure safe operation.

• The rated speed of the accessory must be at least equal to the maximum speed

marked on the power tool. Accessories running faster than their rated speed can

break and fly apart.

• The outside diameter and the thickness of your accessory must be within

the capacity rating of your power tool. Incorrectly sized accessories cannot be

adequately guarded or controlled.

• Threaded mounting of accessories must match the grinder spindle thread. For

accessories mounted by flanges, the arbour hole of the accessory must fit the

locating diameter of the flange. Accessories that do not match the mounting

hardware of the power tool will run out of balance, vibrate excessively and may

cause loss of control.

• Do not use a damaged accessory. Before each use inspect the accessory such

as abrasive wheels for chips and cracks, backing pad for cracks, tear or excess

wear, wire brush for loose or cracked wires. If power tool or accessory is dropped,

inspect for damage or install an undamaged accessory. After inspecting and

installing an accessory, position yourself and bystanders away from the plane

of the rotating accessory and run the power tool at maximum no-load speed for

one minute. Damaged accessories will normally break apart during this test time.

• Wear personal protective equipment. Depending on application, use face

shield, safety goggles or safety glasses. As appropriate, wear dust mask,

hearing protectors, gloves and shop apron capable of stopping small abrasive

or workpiece fragments. The eye protection must be capable of stopping flying

debris generated by various operations. The dust mask or respirator must be

capable of filtrating particles generated by your operation. Prolonged exposure

to high intensity noise may cause hearing loss.

• Keep bystanders a safe distance away from work area. Anyone entering the

work area must wear personal protective equipment. Fragments of workpiece

or of a broken accessory may fly away and cause injury beyond immediate area

of operation.

• Hold the power tool by insulated gripping surfaces only, when performing an

operation where the cutting accessory may contact hidden wiring or its own cord.

Cutting accessory contacting a “live” wire may make exposed metal parts of the

power tool “live” and could give the operator an electric shock.