Home
Главная
Brayer
Термопоты
BR1099
Руководство по эксплуатации Страница: 8

Brayer BR1099 Руководство по эксплуатации онлайн [8/56] 879075

• Unpack the thermopot and remove all the packaging

materials.

• Keep the original package.

• Read the safety measures and operating

recommendations.

• Check the delivery set.

• Examine the thermopot for damages, in case of

damage do not plug it into the mains.

• Make sure that the specications of power supply

voltage specied on the label correspond to the

specications of your mains. When using the

thermopot in the mains with 60 Hz frequency, the unit

does not need any additional measures.

• Wipe the outer surface of the unit body with a clean,

slightly damp cloth to remove dust.

• Remove the lid (5).

• Remove the water tank (6).

• Wipe the water tank (6) inner surface with a clean,

slightly damp cloth to remove dust. Close the lid (5).

CONTROL PANEL

Before using the thermopot, familiarize yourself

with the functions of the buttons on the control

panel (4).

• «10» Indicator of the need for descaling «Descaling»,

after using the thermopot for 10 hours, the indicator

(10) «

» will ash, this means that it is necessary

to clean o󰀨 mineral deposits (scale) (see section

Removing mineral deposits).

• «11» Indicator of lack of water in the tank «Lack of

water», if the tank (6) runs out of water, a ashing

error code E 7 and a ashing indicator (11) «

» will

be displayed, add water to the tank (6) and continue

using the thermopot.

• «12» Water supply button for brewing co󰀨ee or tea

», when you press the button (12) « », the

temperature 92°C will be displayed in digital symbols

(19), you can select the required water supply

volume: 000 (constant ow of water), 100 ml, 200

ml, 300 ml, 400 ml. After setting the desired volume

of water supply, press the on/o󰀨/water supply button

(14) «

»; if you need to turn o󰀨 the water supply,

press the button (14) «

» again.

• «13» Button for selecting the volume of water supply

», by pressing the button (13) « », set the

required volume of water supply: 100 ml, 150 ml, 200

ml, 250 ml, 300 ml, 350 ml, 400 ml, 000 (continuous

supply water), the set volume of water supply is

displayed in digital symbols (18).

• «14» On/o󰀨/water supply button «

», to turn on the

water supply, press the button (14) «

», if you need

to turn o󰀨 the water supply, press the button (14) «

» again.

• «15» Lock button «

», to unlock the thermopot,

press and hold the button (16) «

» for about 3-5

seconds. If no action is performed within 10-15

seconds, the thermopot will automatically be blocked.

Brayer BR1099 Руководство по эксплуатации онлайн [8/56] 879075

Похожие устройства