Home
Главная
Brayer
Термопоты
BR1099
Руководство по эксплуатации Страница: 9

Brayer BR1099 Руководство по эксплуатации онлайн [9/56] 879075

• «16» Button for setting the required water supply

temperature «

», by pressing the button (16) « » set

the required water supply temperature: 40°C, 50°C,

60°C, 70°C, 80°C, 90°C, 100°C, 000 (normal water

temperature), the set water supply temperature is

displayed in digital symbols (19).

• «17» Water supply button for preparing baby formula

», put the baby formula into a bottle or cup, press

and hold the button (17) «

», the temperature 40°C

will be displayed in digital symbols (19), hold the

button (17) «

» until you have poured the required

amount of water, then release the «

» button (17).

ATTENTION! In the water supply mode for preparing

baby food, at all temperature settings, the water does

not boil in advance, therefore, when preparing baby

food, it is recommended to rst boil and then cool the

water to room temperature, pour it into the tank (6) and

use it.

• «18» In digital symbols (18) the set water supply

volume is displayed.

• «19» In digital symbols (19) the set water supply

temperature is displayed.

THE FIRST USE

• Place the thermopot on a dry at surface keeping at

least 20 cm gap between the thermopot body and

the wall or furniture and at least 50 cm gap above the

thermopot.

• Remove the lid (5) (pic. 1).

• Fill the thermopot with water using suitable

containers but do not exceed the maximum water

level mark. Do not ll the thermopot with water

directly from the faucet; to ll the thermopot use a

suitable bowl.

• You can remove the water tank (6) and ll it with

water (Fig. 2), replace the tank (6) and close it with

the lid (5).

Notes: to reduce the mineral deposit (scale), we

recommend using the water cleaned with domestic

lters.

• Insert the power cord plug into the mains socket.

• Place a cup with a volume of at least 200 ml on the

grid (2) of the removable drip tray (1), make sure that

the cup is under the spout for pouring water (3).

• To unlock the thermopot, press and hold the button

(16) «

» for approximately 3-5 seconds.

• By pressing the button (13) «

», set the water

supply volume: 200 ml, the set water supply volume

will be displayed in digital symbols (18).

• To turn on the water supply, press the button (14) «

»; if you need to turn o󰀨 the water supply, press

the button (14) «

» again.

• After lling the cup for the rst time, drain the water

and ll and drain the cup one or two more times.

• Press the button (16) «

» to set the water

supply temperature: 100°C, the set water supply

Brayer BR1099 Руководство по эксплуатации онлайн [9/56] 879075

Похожие устройства