Home
Главная
Brayer
Термопоты
BR1099
Руководство по эксплуатации Страница: 10

Brayer BR1099 Руководство по эксплуатации онлайн [10/56] 879075

temperature will be displayed in digital symbols (19).

• To turn on the water supply, press the button (14) «

»; if you need to turn o󰀨 the water supply, press

the button (14) «

» again.

• After lling the cup with hot water for the rst time,

drain the water and ll and drain the hot water from

the cup one or two more times.

ATTENTION! Be careful when pouring out water to

avoid burns by hot water.

• It is not recommended to consume the hot water

obtained from the initial boiling for food, you can use

it for household needs.

USING THE THERMOPOT

• Fill the thermopot with water using suitable

containers, but do not exceed the maximum water

level mark. Do not ll the thermopot with water

directly from the faucet; to ll the thermopot use a

suitable bowl.

• You can remove the water tank (6) and ll it with

water (Fig. 2), replace the tank (6) and close it with

the lid (5).

• Insert the power cord plug into the mains socket.

• Place a cup of the required volume onto the grid (2)

of the removable drip tray (1), make sure that the cup

is under the water drain spout (3).

• To unlock the thermopot, press and hold the «

button (16) for approximately 3-5 seconds.

• By pressing the button (13) «

», set the desired

water supply volume: 100 ml, 150 ml, 200 ml,

250 ml, 300 ml, 350 ml, 400 ml, 000 (continuous

water supply), the set water supply volume will be

displayed in digital symbols (18).

• Press the button (16) «

» to set the desired water

supply temperature: 40°C, 50°C, 60°C, 70°C, 80°C,

90°C, 100°C, 000 (normal temperature water), the

set water supply temperature will be displayed in

digital symbols (19).

• To turn on the water supply, press the button (14) «

»; if you need to turn o󰀨 the water supply, press

the button (14) «

» again.

Note: in the water supply mode for preparing baby food,

water is supplied by pressing and holding the button

(17) «

», when you pour the required amount of water,

release the button (17) «

».

WARNING! To avoid the risk of burns, always check

the temperature of baby food before giving it to

your baby. You can easily check the temperature

of baby food by placing a few drops on the back of

your hand.

ATTENTION! Be careful when pouring water into the

cup to avoid burns by hot water.

• If the tank (6) runs out of water, a ashing error

code «E 7» and a ashing indicator (11) «

» will

Brayer BR1099 Руководство по эксплуатации онлайн [10/56] 879075

Похожие устройства