Xiaomi Robot Vacuum 210+ Руководство по эксплуатации онлайн [10/165] 881305
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Xiaomi Robot Vacuum 210+ Руководство по эксплуатации онлайн [10/165] 881305

Xiaomi Robot Vacuum X20+ EU Руководство по эксплуатации онлайн [10/165] 875333
15 16
Care & Maintenance
Parts
To keep the robot vacuum in good condition, it is recommended to refer to the following table for routine maintenance.
Notes:
· The replacement frequency is for reference only. If a part is damaged, it should be replaced
promptly to ensure efficient cleaning.
· To move or ship the robot vacuum, please empty the clean and dirty water tanks to avoid the
robot vacuum getting damaged in transit.
Part Cleaning Frequency Replacement Frequency
Dust Compartment Clean as required /
Filter (Pre-installed on
the dust compartment)
Clean every two weeks 3–6 months
Clean Water Tank Clean every two weeks
/Dirty Water Tank
Recommended to clean
after each use
Washboard Clean every 1–2 weeks
Brush Clean every two weeks 6–12 months
Side Brush Clean every two weeks 3–6 months
Mop Pad / 1–3 months
Caster Wheel
Clean every month /LDS Laser Sensor
Line Laser Sensor
Part Cleaning Frequency Replacement Frequency
Cliff Sensor
Clean every month /
Robot vacuum's
charging contacts
Bumper
Auto-empty vents of
robot vacuum
Bottom of the robot
vacuum
Omni station
Omni station's charging
contacts
Omni station's signaling
area
Disposable bag /
Replace about every 2.5
months depending on
actual use
1. When the disposable bag is full, pull the cover out from the dust cabinet
opening. Remove the disposable bag using the handle, and discard it. Then use a
dry cloth to wipe away any dirt from the filter.
2. Install a new disposable bag as illustrated and insert the handle of the bag into
the slot. Then put the dust cabinet cover back, and it is properly installed when
you hear a "click".
Replacing the disposable bag
Note: Pulling the handle of the disposable bag will seal the bag to prevent the dust and debris
from accidentally falling out.
Dust Cabinet
Opening
Click
1. Remove both the clean and dirty water tanks, open their covers, and pour out
the water.
2. Use clean water to completely wash the tanks, then wipe the outside of the
tanks dry before reinserting them into the omni station.
Cleaning the clean and dirty water tanks
Note: Both the floater in the clean water tank and the float ball in the dirty water tank are
movable parts. Do not apply too much force when cleaning them to avoid damaging them.

Похожие устройства

Скачать