Xiaomi Robot Vacuum 210+ Руководство по эксплуатации онлайн [11/165] 881305
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Xiaomi Robot Vacuum 210+ Руководство по эксплуатации онлайн [11/165] 881305

Xiaomi Robot Vacuum X20+ EU Руководство по эксплуатации онлайн [11/165] 875333
17 18
Note: Do not tilt the omni station during daily use or cleaning. If water collects in the washboard
base, wipe it dry with a cloth.
Cleaning the washboard and washboard base
1. Select the omni station cleaning function in the app and the robot vacuum will
automatically leave the omni station. Manually remove the washboard, and then
the omni station will automatically inject water into the washboard base. Use a
cloth or brush to clean any dirt from the base and washboard.
2. Wait for three minutes and the omni station will automatically drain away
the dirty water. Use a dry cloth to wipe clean the washboard base and the
washboard, then reinstall the washboard. Once the base has been cleaned, you
can manually place the robot vacuum onto the omni station, use the app, or
press the button
on the robot vacuum to send it back.
Use a soft cloth to clean all sensors and chraging contacts in the robot vacuum:
·
The cliff sensors on the bottom of the robot vacuum.
·
The charging contacts on the back of the robot vacuum.
·
The LDS laser sensor on the top of the robot vacuum.
·
The bumper and the line laser sensor on the front of the robot vacuum.
Cleaning sensors and charging contacts
Line Laser Sensor
Cliff Sensor
LDS Laser Sensor
Charging Contacts
Bumper
Brush Cover
Brush Cover Clips
Brush
Brush Bearings
CAUTION: If too much hair is tangled in the brush, or if the hair is tightly tangled, do not
forcibly pull on it, as this could damage the brush.
Cleaning the brush and side brush
1. Flip the robot vacuum over and pinch the clips to remove the brush cover.
2. Lift the brush out, remove the bearings on both ends, and clean the brush's axle.
3. Use scissors to cut any hair tangled around the brush, and remove any debris.
4. Pull out the side brush upwards and clean it.
5. Reinstall the side brush, brush and brush cover, and ensure they are securely in place.
Cleaning the caster wheel
1. Flip the robot vacuum over and pull out the caster wheel.
2. Remove hair, dirt, and other debris from the wheel and axle.
3. Reinsert the caster wheel and press it firmly back into place.
Notes:
· A small screwdriver or other pry tool can be used to gently pop out and remove the wheel.
· The wheel can be cleaned with water and reinstalled after drying.
Wheel
Axle
Clean the charging contacts, the auto-empty vents, and the signaling area of
the omni station with a soft, dry cloth.
Cleaning the omni station
Battery
The robot vacuum contains a high-performance lithium-ion battery pack. Please
ensure that it remains well-charged during daily use to maintain optimal battery
performance.
Note: If the robot vacuum is not used for an extended period, turn it off and put it away. To
prevent damage from over-discharging, the robot vacuum should be recharged at least once
every three months.

Похожие устройства

Скачать