Xiaomi Robot Vacuum 210+ Руководство по эксплуатации онлайн [7/165] 881305
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Xiaomi Robot Vacuum 210+ Руководство по эксплуатации онлайн [7/165] 881305

Xiaomi Robot Vacuum X20+ EU Руководство по эксплуатации онлайн [7/165] 875333
9 10
How to Install
Removing Protective Coverings
Installing the Side Brush and the Mop Assembly
Before using the robot vacuum, remove the protective strips from both sides.
Install the side brush and the mop assembly respectively as illustrated. They are
properly installed when you hear a "click".
Side Brush
Mop Assembly
(Mop Pad Holder +
Mop Pad)
Placing the Omni Station
Firmly insert the connector
upwards into the power port
until the indicator on the
station remains white.
Place the omni station against a wall on a flat and hard-surfaced floor, such as a
wooden or tiled floor. Make sure there is empty space of more than 0.82 meters
in height, more than 1.93 meters in length, and more than 0.44 meters in width.
Ensure the omni station is in an area with a good Wi-Fi signal near an electrical
outlet, and then connect it to power.
> 0.44 m
> 1.93 m
0.59 m
> 0.82 m
- MAX -
MAX
How to Use
Fill the clean water tank with clean water up to the maximum water level mark.
Maximum Water Level Mark
Water Tank Capacity: 4 L
· Do not add water above the maximum water level mark (MAX).
· Do not add hot water to the water tank, as this may cause the tank to become
deformed.
· Do not add any substance like detergents other than clean water to avoid damaging the
robot vacuum.
Notes:
Adding Water to the Clean Water Tank
Before use, press and hold the button on the robot vacuum for three seconds
to turn it on. Once the robot vacuum is on, place it onto the omni station, and
make sure the charging contacts on the robot vacuum and the station are fully
aligned. The robot vacuum connects to the omni station successfully when you
hear a voice prompt for starting charging.
Notes:
· Before the first use, it is recommended to fully charge the robot vacuum. If the robot vacuum
cannot be turned on due to low battery level, manually place the robot vacuum onto the
omni station to charge it for a while.
· When the robot vacuum is being charged, it will automatically turn on and cannot be turned off.
Placing the Robot Vacuum

Похожие устройства

Скачать