Xiaomi Robot Vacuum 210+ Руководство по эксплуатации онлайн [8/165] 881305
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Xiaomi Robot Vacuum 210+ Руководство по эксплуатации онлайн [8/165] 881305

Xiaomi Robot Vacuum X20+ EU Руководство по эксплуатации онлайн [8/165] 875333
11 12
Connecting with the Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app*. Use the Mi Home/Xiaomi
Home app to control your device, and to interact with other smart home devices.
Scan the QR code to download and install the app. You
will be directed to the connection setup page if the
app is installed already. Or search for "Mi Home/Xiaomi
Home" in the app store to download and install it.
Open the Mi Home/Xiaomi Home app, tap "
" on the
upper right, and then follow the instructions to add your
device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The
name of the app displayed on your device should be taken as the default.
Notes:
· The robot vacuum works with the Mi Home/Xiaomi Home app, and it supports Android 9.0 &
iOS 12.0 or above.
· Only 2.4 GHz Wi-Fi networks are supported.
· The version of the app might have been updated, please follow the instructions based on the
current app version.
Resetting Wi-Fi
Take the following steps if the robot vacuum cannot be connected to the network
because the router is reset, the password is forgoen, or for other reasons:
1. Open the cover of the robot vacuum so that you can see the Wi-Fi indicator.
2. Simultaneously press and hold the buons
and until you hear a voice to
indicate that the robot vacuum is waiting for the network configuration.
3. When the Wi-Fi indicator blinks, the Wi-Fi connection has been reset successfully.
Sleep Mode
The robot vacuum will automatically enter sleep mode after it is paused for 10
minutes, and its indicator will go out. To wake it up, press any button on the robot
vacuum.
Pausing
When the robot vacuum is running, press any button to pause it.
Note: Do not lift or move the robot vacuum while it is paused. Otherwise, it may have navigation
errors that could prevent the robot vacuum from returning to the omni station or cause the loss
of the map.
Quick Map Creation
After configuring the network for the first time, follow the instructions in the
app to quickly create a map, and the robot vacuum will start mapping without
cleaning. The mapping process will be completed when the robot vacuum
returns to the omni station, and the map will be saved automatically.
Turning On/Off
Press and hold the button for three seconds to turn the robot vacuum on.
When the indicator on the robot vacuum lights up, it means the robot vacuum
enters the standby mode. When the robot vacuum is paused and not being
charged, press and hold the button
for three seconds to turn it off.
Note: When the robot vacuum is charging, it will automatically turn on and cannot be turned off.
78FF9E4E
Notes:
· To prevent the carpets from being wet when mopping, you can manually add carpeted areas in
the app and select a carpet cleaning method.
· When using the robot vacuum for the first time, it is recommended to follow the robot vacuum
throughout the whole process to remove the items that may affect its work.
· If the robot vacuum may get stuck or scratch the surface of furniture in some areas, you can
set restricted areas in the app to prevent the robot vacuum from entering these areas.
· When the robot vacuum runs on an area covered with shaggy rugs, in dark environments, or in
environments with highly reflective surfaces, its performance may to some extent be affected.
· The robot vacuum will moisten the mop pads before starting, please wait with patience.
· Before starting, ensure the omni station is connected to power and the robot vacuum is
connected to the omni station.
· To ensure that the robot vacuum can return to the omni station successfully after completing
vacuuming and mopping, it is recommended to make the robot vacuum start from the omni
station. Do not move the omni station, the clean water tank, the dirty water tank, or the
washboard during cleaning.
①
Start cleaning
Before starting, ensure the mop assembly and other necessary parts have been
installed onto the robot vacuum and the clean water tank has been added water.
Select the vacuuming and mopping mode in the app, and use the app or press
Vacuuming and Mopping
Dust Emptying
When the robot vacuum automatically returns to the omni station to charge aer
completing a vacuuming and mopping task, a vacuuming before mopping task,
or a vacuuming task, the omni station will automatically start to empty the dust
compartment.
Notes:
· When the robot vacuum returns midway to the omni station to clean mop pads, the station
will not automatically empty the dust compartment.
· If the function of auto dust emptying is disabled in the app, the omni station will not
automatically empty the dust compartment.
Resuming Cleanup
If the robot vacuum starts running low on baery during a cleaning task, it will
automatically return to the omni station to charge. When the robot vacuum is
fully charged, it will resume cleanup where it le off.
Note: When the child lock is enabled, the buttons on the robot vacuum will not work.
Child Lock Settings
To enable or disable the child lock, press and hold the buon on the robot
vacuum for three seconds.
the button
on the robot vacuum to make it start from the station. Then the
robot vacuum will plan the optimal cleaning route and perform the cleaning task
based on the created map.

Похожие устройства

Скачать