Buffalo LS441D1604-EU [81/105] Usb device server

Buffalo LS441D1604-EU [81/105] Usb device server
80
4 Tap Apply, then OK.
USB Device Server
The USB device server lets you use USB devices connected to the LinkStation with multiple computers.
1 Connect the USB device directly to your computer and install its drivers and software normally.
Dismount and remove the USB device when installation is complete.
2 Connect the USB device to the LinkStation's USB port.
Note: With the USB device server enabled, you may connect a single USB hub to the LinkStation. Up to 15
USB devices may be connected to the hub. Don't connect more than one bus-powered drive at a time. Use a
separate AC power connection for each device if possible. Connecting more than one bus-powered device at a
time may damage both the LinkStation and the devices.
3 In Advanced Settings, click File Sharing.
4 Click to the right of "Folder Setup".
5 Select the USB device connected to the LinkStation.
Note: USB device server and DLNA are not compatible. Disable DLNA protocol support if using USB device
server.
6 Move the USB device server switch to the position to enable the USB device server.
You can also enable the USB device server from Easy Admin.
Note: When the USB device server is enabled, other functions that use the USB port won't be available.
7 To install Network-USB Navigator, click USB Device Server in Easy Admin or navigate to Services - USB Device
Server - USB Device Server in Advanced Settings. You'll need administrator privileges to install the software.
Connecting with Network-USB Navigator
1 Launch Network-USB Navigator.
For Windows:
Navigate to (All) Programs - BUFFALO - Network-USB Server, then click Network-USB Navigator. On Windows 8.1
or Windows 8, click Network-USB Navigator from the Start screen.
For Mac:
Navigate to Macintosh HD - Applications - BUFFALO - Device Server - Network-USB Navigator.

Содержание

Похожие устройства

Скачать