Buffalo WHR-G300NV2 — решение проблем с беспроводным подключением и настройками [84/107]

Превью страниц Страница 84 / 107

Chapter 6 Trouble Shooting

WHR-G300N User Manual 83

Cannot connect to the network wirelessly.

• CongureyourwirelessclientwiththesameSSID,encryptiontype,andencryptionkeyasset

on the AirStation.

The factory defaults are:

 SSID-    TheAirStation’sMACaddress(printedonthelabel)

 EncryptionType- WPA/WPA2mixedmode-PSK(ConnectwitheitherWPA-PSKTKIPor

    WPA2-PSKAES).

 EncryptionKey- PrintedonthelabeloftheAirStation(ifnot,theAirStationisnot

encrypted in the default conguration.)

• PlaceyourAirStationandwirelessdevices2-10feetapart.

• RestartyourAirStation.

You forgot AirStation's SSID, Encryption Key, or

Password.

Hold down the Reset button on the base of your AirStation for 5 seconds to initialize its settings. All

settings,includingyourpassword,SSID,andencryptionkeywillbeinitializedtotheirdefaults.The

factory defaults are:

 SSID-    TheAirStation’sMACaddress(printedonthelabel)

 EncryptionType- WPA/WPA2mixedmode-PSK(ConnectwitheitherWPA-PSKTKIPor

    WPA2-PSKAES).

 EncryptionKey- PrintedonthelabeloftheAirStation(ifnot,theAirStationisnot

encrypted in the default conguration.)

The link speed is slower than 300 Mbps (Maximum

link speed is only 150Mbps).

By default, the AirStation’s 300 Mbps mode is not enabled. You may enable it with the following

procedure:

1. Open the conguration utility (chapter 4).

 2. Click"Wireless SSID & Channel (11n 300Mbps Mode)"inEasySetup.

 3. Changethevaluein"300Mbps Mode" - "Band Width" to 40 MHz and click "Apply".

Ifyoustillcannotconnectat300Mbps,checkthesettingsofyourwirelessclientdevice.