Buffalo TS-WVH4.0TL/R1EU [10/75] Power button

Buffalo TS-WVH4.0TL/R1EU [10/75] Power button
9
1 Power Button
Power on: Press the power button to turn on.
Power o: Press the power button twice in 3 seconds.
Note: To power on, connect the power cable and wait for 10
seconds. Then press the power button.
2 Info LED
If there is a message about the current status, the amber info
LED is illuminated. Check the LCD panel for current status.
3 Error LED
The red error LED is illuminated when an error occurs. Check
the LCD panel for more information.
4 LAN1 LED
When LAN port 1 is connected to a network, it is illuminated
in green. The light next to LAN port 1 will be illuminated as
well.
5 LAN2 LED
When LAN port 2 is connected to a network, it is illuminated
in green. The light next to LAN port 2 will be illuminated as
well.
6 LCD Panel
Displays the status of the TeraStation.
7 Display Button
Switches between the dierent display modes.
8 Function Button
Use this button to perform the following operations:
• DirectCopy
• Removal of USB devices
• Rebuild RAID array after replacing hard drives
• Failover (Backup TeraStation)
9 Drive Lock
Open the front panel with the key to replace hard drives or
press the reset button.
10 Reset Button
To shut down and reboot the TeraStation, hold down this
button.
11 Status LEDs
LEDs 1 through 8 will glow green when the corresponding
hard drives are accessed. If a drive fails, the corresponding
LED will glow or ash red (or just ash amber).
12 Factory Use Only
13 Boot Mode Switch
This is a switch used for the TS-6VHL/E, TS-8VHL/E, TS-
QVHL/E, TS-WVHL/E, and TS-RVHL/E TeraStation models.
Normally, use this switch at the default setting of [HDD]. Do
not change the switch to the [USB] position.
14 UPS Port
Connect a UPS (Uninterruptible Power Supply).
15 USB 3.0 Port
Compatible Bualo USB 3.0 hard drives can be connected.
USB hubs are not supported.
Note: TS-8VHL TeraStation models do not have this port.
16 USB 2.0 Port
Compatible Bualo USB hard drives, USB ash drives, digital
cameras, and USB UPS connection can be connected. USB
hubs are not supported.
17 LAN Port 1
Connect to a router, hub, or switch on your Ethernet network.
18 LAN Port 2
Use this second Ethernet port for redundancy or backup. For
backup, a second TeraStation may be connected directly.
19 Power Connector
Use the included power cable to connect to an UPS, surge
protector, or outlet.
20 Fan
Do not block the fan while the unit is running.
21 Anti-Theft Security Slot
You can connect an o-the-shelf wire lock to this slot.
22 UID Button
Press the UID button on the front or the back of the unit to
cycle the blue LED between on and o.
23 Factory Use Only
Only TS-RVHL TeraStation models have this port.

Содержание

Похожие устройства

Скачать