Gaggenau AI 280 [15/24] Important information

Old appliances are not worthless rubbish. Valuable

raw materials can be reclaimed by recycling old

appliances. Before disposing of your old appliance,

render it unusable.

You received your new appliance in a protective

shipping carton. All packaging materials are

environmentally friendly and recyclable. Please

contribute to a better environment by disposing of

packaging materials in an environmentally-friendly

manner.

Please ask your dealer or inquire at your local

authority about current means of disposal.

The extractor hood can be used in exhaust air or

circulating air mode.

Always mount the extractor hood over the centre of

the hob.

Minimum distance between electric hob and bottom

edge of extractor hood 600 mm, Fig. 1.

The extractor hood must not be installed over a

solid fuel cooker – a potential fire hazard (e.g. flying

sparks) – unless the cooker features a closed, non-

removable cover and all national regulations are

observed.

The smaller the gap between the extractor hood and

hotplates, the greater the likelihood that droplets

will form on the underside of the extractor hood.

Additional information concerning gas cookers:

When installing gas hotplates, comply with the

relevant national statutory regulations (e.g. in

Germany: Technische Regeln Gasinstallation

TRGI).

Always comply with the currently valid regulations

and installation instructions supplied by the gas

appliance manufacturer.

Only one side of the extractor hood may be installed

next to a high-sided unit or high wall. Gap at least

50 mm.

Minimum distance on gas hotplates between the

upper edge of the trivet and lower edge of the

extractor hood: 700 mm, Fig. 1.

Important information