Brayer BR1028 серебристый/черный [6/0] Before using the kettle
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR1028 серебристый/черный [6/0] Before using the kettle

Brayer BR1028 серебристый/черный [6/0] Before using the kettle
6
EN
• Do not repair the unit by yourself. Do not disassemble
the unit by yourself, if any malfunction is detected, and
after it was dropped, unplug the unit and apply to the
service center.
• Transport the kettle in the original package.
• Keep the unit out of reach of children and disabled
persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE USING THE KETTLE
After unit transportation or storage at low
temperature, it is necessary to keep it for at least
three hours at room temperature.
• Unpack the kettle and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the kettle for damages, in case of damage do
not plug it into the mains.
• Make sure that the specications of power supply
voltage specied on the lower panel of the unit or
the base correspond to the specications of your
mains. When using the kettle in the mains with 60
Hz frequency, the unit does not need any additional
settings.
• Wipe the base (4), the outer and inner surfaces of the
ask (2) with a clean, slightly damp cloth to remove dust.
ATTENTION! Be careful while handling the kettle, glass
ask can break when the kettle is dropped or hit against a
solid object.
• Place the base (4) on a solid steady at and non-slip
non-metal surface away from heat sources as far as
possible from the edge of the surface.
• Do not place and do not use the kettle in closed space,
for example, in the cupboard or in closed structures —
this can lead to its breakage, cause harm to the user or
damage to his/her property.
• Take the handle (10), pull it upwards and remove the lid
(9).
• Remove the brewing strainer(7), to do this, turn the
strainer in the Open direction. Pour in the required
amount of tea and screw the strainer(7) back.
• Wipe the lid (9) and wash the tea infuser (7) with the
neutral detergent solution, rinse and dry.
• Wash the ask (5) with neutral detergents, rinse and
dry. Wipe the outer surface of the ask (5) with a slightly
damp cloth and then wipe it dry. Do not use abrasives
and coarse scourers for this.
• Before connecting the kettle, make sure that there are no
moisture drops on the base (4), the ask (5), the power
cord and the power plug.
• Fill the kettle with water up to the «MAX» mark (6),
according to the scale situated on the outer surface of
the ask (5).

Содержание

Похожие устройства

Скачать