Zelmer ZVC9150D Leon Руководство по эксплуатации онлайн [14/84] 897988

Vacuum cleaner function

TRADIONAL CLEANING WITH DUST BAG

1. Press and hold the container lid opening button and lift the container lid.

2. Remove the water lter module from the container

3. Insert the dry ltration module with the dust bag to the container.

4. The vacuum cleaner stars at the same power level it had been working before it was turned off. Set the

desired power value by pressing the power adjustment buttons +/-.

The vacuum cleaner is equipped with a power level memory function. When you turn off the vacuum

cleaner using the ON/OFF button, the power level is going to be stored in memory. After the vacuum

cleaner is turn on next time, it is going to start work at the same power level it had been working

before it was turned off.

The vacuum cleaner is equipped with a power limiting function should the inlet opening be clogged

or the dust bag full. It is manifested by a pulsing limitation of the motor power and the lighting up

of the clogged air inlet indicator while the vacuum cleaner is operating at full power. In such case

switch off the vacuum cleaner by pressing the on/off button, unplug the appliance and clear the

tubes or replace the dust bag.

Dust bag disassembly/assembly

1. Remove the lter unit of the container and pull the dust bag lter module out of the container.

2. Remove the dust bag.

3. Insert the dust bag according to the arrow printed on the bag so that the lower part of the bag plate is in

the slot of the housing. Press the upper part of the bag plate to the fastening until hear a characteristic click.

4. Insert the dry ltration module back to the container.

VACUUM CLEANING WITH THE USE OF

THE WATER FILTER MODULE

1. Press and hold the lid opening button and lift the lid.

2. Insert the partition to the grooves in the container so that the shutters are directed downwards. Make

sure the partition is correctly mounted in the container i.e. the partition ns should cover the protrusion in

the container.

3. Fill the container with 1.3-1.5 liter of water.

The water level should be in the range marked on the wall of the container.

4. Cover the container with the lter unit.

WET VACUUMING AND WET CLEANING

Before using the wet cleaning function thoroughly vacuum the surface to be cleaned.

Before operating the vacuum cleaner make sure the container is empty and the water lter module and the

lters are clean.

1. Press and hold the container lid opening button and lift the container lid.

2. Remove the container together with the water lter module from the vacuum cleaner.

3. Remove the cleaning liquid container by pulling it by the handle and lifting it upwards.

4. Open the ller cap and ll the cleaning liquid container with cleaning agent (a mixture of cleaning uid

and cold water.)