Rondell RDE-2001 Руководство по эксплуатации онлайн [13/28] 899565
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Rondell RDE-2001 Руководство по эксплуатации онлайн [13/28] 899565

Rondell RDE-2001 Руководство по эксплуатации онлайн [13/28] 899565
13
ENGLISH
•
Always check the recommended ironing temperature
indicated on the tag before ironing.
•
Do not iron the item if its label contains the symbol.
•
If there is no tag with recommended ironing temperature,
but you know the type of fabric, refer to the following table
to determine the proper ironing temperature.
Ironing temperature table
Icons Fabric type (temperature)
Do not iron
МИН.
nylon (minimum temperature)
•
wool, silk, synthetics
••
polyester (medium temperature)
•••
cotton/linen (high temperature)
• This table only applies to smooth materials. Fabrics of
other types (crimped, raised, etc.) are best ironed at a
low temperature.
• Sort your garments according to the ironing temperature
first: separate synthetic fabrics, wool, cotton, and so on.
• The iron heats up faster than it cools down. For this
reason, it is recommended to iron the items which
require low temperature first (for instance, synthetic
fabrics). Then proceed to ironing at higher tempera-
tures (silk/wool). Cotton and linen garments should
be ironed last.
• If an item is made of mixed fabrics, the iron should be set
to the lowest temperature (for instance, if an item is 60%
polyester and 40% cotton, it should be ironed at tem-
perature used for polyester ironing
«•» or «••»
).
• If you cannot determine the composition of the fabric,
find an inconspicuous spot and select the ironing tem-
perature through trial and error (always start with the
lowest temperature and raise it gradually until you get
the desired result).
• Corduroy and other fabrics that become glossy quickly
should be ironed strictly in one direction (in the direction
of the pile) with gentle pressure.
• To avoid the appearance of glossy spots on synthetic
and silk fabrics, they should be ironed on the reverse
side.
«МИН.» Mode (20)
This mode automatically sets the appropriate temperature
suitable for any type of fabric, preventing damage to clothes
when the temperature is chosen incorrectly. The МИН.
Mode is not intended for fabrics that cannot be ironed. For
more information, see the clothes care label.
•
To select this mode, tap the control button (11) until the
«МИН.» LED indicator (20) appears on the indication
panel (7).
•
The iron will enter the heating mode, and the temperature
mode indicator (20) will start flashing.
Once the iron has reached the desired temperature, the
«МИН.» (20) indicator on the indication panel (7) will remain
steadily lit and you can begin dry ironing.
SETTING THE IRONING TEMPERATURE
•
Place the iron on its base (9).
•
Insert the power plug into the mains socket.
•
Tap the control button (11) to select the desired ironing
temperature: «•••», «••», «•», «МИН.» (depending on
the type of fabric).
•
The indication of the selected mode (17-20) will be flash-
ing on the indication panel (7).
•
Once the soleplate (13) reaches the desired tempera-
ture, the indication of the selected mode (17-20) will be
steadily displayed and you can start ironing.
Note: If you were ironing at a high temperature and need
to switch to a lower temperature, it is recommended to wait
until the soleplate temperature drops and the indicator (17-
20) turns on before starting to iron.
WATER SPRAY
•
You can moisturize the fabric by repeatedly pressing the
water spray button (5).
•
Make sure that there is enough water in the water
tank (10).
•
You can use the water spray button (5) at any tempera-
ture, both during steam ironing and dry ironing.
DRY IRONING
•
Place the iron on its base (9).
•
Insert the power plug into the mains socket.
•
Set the continuous steam supply knob (3) to – no
steam supply.
•
Tap the control button (11) to select the desired tempera-
ture: «•••», «••», «•», «МИН.» (depending on the type
of fabric). The selected temperature indication (17-20)
will be flashing.
•
Once the soleplate (13) reaches the desired tempera-
ture and the temperature selection indicator (17-20) is
steadily displayed, you can begin ironing.
•
After you finish ironing, unplug the iron from the mains
and wait for it to fully cool down.

Похожие устройства

Скачать