Magnit RMS-1800 [4/24] Notices
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Magnit RMS-1800 [4/24] Notices

Magnit RMS-1800 [4/24] Notices
1. Do not operate the machine unless you read this manual thoroughly. The machine can only be used indoors.
2. The machine can only be used for the purposes described in this manual. Utilization for other purposes is
prohibited.
3. The water for the machine shall be domestic potable water to avoid contaminating the textiles. Purified
water is recommended.
4. Make sure the working voltage of the machine accords with your domestic supply voltage and the machine
is connected to power supply mounted with 30mA creepage protection switch. Only the firmly grounded 3 pole
socket is applicable for the machine. The rated current shall be not less than 15A.
5. Thoroughly stretch the power cords before use. Avoid sharing the same power supply with other high power
electric appliances. Do not use wiring board in order to prevent fires arising from the wiring board overloaded.
6. Before operation, connect all the necessary ironing or cleaning accessories, fill the outer tank to full and
then turn on the power supply switch.
7.Thoroughly stretch the expansion link to ensure that the steam hose is unobstructed and untwisted and
other functions perform well.
8. The machine shall be put on a flat and stable place.
9. Do not fill hot water in the tank, or the tank would deform. Fill water before operation and observe the water
level from time to time. Add water to proper volume in case it is below the designed water level.
10. Do not directly put the machine under water tap to fill water.
11. Do not fill solutions such as detergent into the tank.
12. Keep power cords and steam pipes from metals or other heating elements.
13. Do not leave the machine operating without attention.
14. The machine shall not be operated by these people (including children): the physically, tactilely or mentally
disabled or those who lack of experience and knowledge, unless they are supervised or guided by someone
who is responsible for their safety in respect of the application of the machine.
15. Children shall be monitored to be prevented from playing with the machine.2* During operation, keep the
ironing brush away from people, animal or domestic electric appliance. When the machine is not in use, turn off
the steam jet switch and put the ironing brush on the support to avoid steam hurting people or damage things.
16. During operation, do not touch the steam jet outlet and steam conduit of the ironing brush or drag the power cords.
17. Do not put on floor or distort the steam conduit, or accidents may be caused by the steam jammed in the
steam conduit when it is squeezed.
18. Do not drag the steam conduit by force or to move the machine, or the steam conduit may be damaged or
steam may leak.
19. Do not pull out or plug in the steam conduit when the machine is still hot but only when the machine is
cooled down, thus to avoid scald.
20. If the ironing brush falls, has visible damage or is leaking, stop using it.
21. To avoid scald by steam, after operation, turn off the power supply, pull out the plug and, when the machine
is cooled down, pour out the remnant water, and then have the machine packed and stored. However, let the
machine air dried before packing and storage. Do not pull put the plug by dragging the power cord.
22. Use dry soft cloth and neutral detergent to clean the machine surface and do not use solvents such as
gasoline, alcohol, banana oil, etc. Prevent liquids penetrating into the machine.
23. Do not soak the machine, power cord or plug in water or other solutions. Do not keep the machine in places
which are damp, exposed or of corrosive gases.
24. Keep the machine away from flammable or explosive objects.
25. Please clean the filter sieve at regular intervals to keep it available. The machine shall be cleaned or
maintained from time to time (every 1 month or 20L water is consumed). (See the following sections for the
cleaning and maintenance)
26. Push the support pole to move the machine. Do not move the machine by force when it is tough to be
moved. Discharge the water before checking the wheels. Turn off the power supply and pull out the plug before
moving the machine.
27.Turn off the power supply and pull out the plug before discharging water from or filling water in the tank.
Avoid water leakage. Do not open or take down the tank in use.
28. If find any damage on the accessories especially the safe protection and power cord, stop using the
machine and inform our professional personnel of service center for repair. Do not repair at your own
discretion.
29. Before cleaning or repairing the machine, turn off the power supply, pull out the plug, release the pressure
inside the heating element of the base and let the machine cool down.3Do abide by the following for the safety
of yourself and others.
Notices
4

Содержание

Похожие устройства

Скачать