Magnit RMS-1800 [7/24] Installation instructions

7. Lift down the hood of connecting hole, take out the ironing brush, align the plug of ironing brush

with and insert it into the corresponding hole on machine body, and tighten it clockwise. After

using, please pull out the ironing brush and cover the hood.

Installation instructions

8. If required, take out the fur brush, align the plastic clasps at bottom of fur brush with and grip it

into the metallic snap close at the bottom of ironing brush. The dismounting is in a reverse order.

9. Hang the ironing brush on the hook for it.

Note: The dismounting is in a reverse order. (Put the machine body and all

accessories in safe place during installation and dismounting.)

Product Operations

1. Stand the machine assembled on flat and stable floor. Adjust the height and spread range of the

hanger as required and hang the clothes on it. Ensure there is enough water in the water tank and

the tank is located properly. Plug the plug into the power socket, select the appropriate gear. Let

the machine preheat for about 40s, waiting for steam of ironing brush.

IRONING:

When the steam tube bending, it happen to emit cooing sound. Water bead may be

appeared on the steam holes and the amount of steam will decrease significantly.

Lift the handle for 2-3 seconds in this case, everything will be ok.

2. Iron from the main part of clothes, hold the lower

hem by hand gently to make the wrinkled part flat

and iron the rippled fibers out by the hot steam (as

shown in Picture 2).