Kenwood DPX206U [12/60] Audio settings

Kenwood DPX206U [12/60] Audio settings
10
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
PRESET EQ DRIVEEQ
/
TOP40
/
POWERFUL
/
ROCK
/
POPS
/
EASY
/
JAZZ
/
NATURAL
/
USER
:Selects a preset equalizer suitable to the music genre.
(Select [
USER
] to use the customized settings.)
[
DRIVE EQ
] is a preset equalizer that reduces noise outside the car or
running noise of the tyres.
BASSBOOST LEVEL1
/
LEVEL2
/
LEVEL3
:Selects your preferred bass boost level.;
OFF
:Cancels.
LOUDNESS LEVEL1
/
LEVEL2
:Selects your preferred low and high frequencies boost
to produce a well-balanced sound at a low volume level.;
OFF
:Cancels.
SUBWOOFERSET ON
:Turns on the subwoofer output.;
OFF
:Cancels.
LPFSUBWOOFER THROUGH
:All signals are sent to the subwoofer.;
85HZ
/
120HZ
/
160HZ
:Audio signals with frequencies lower than 85Hz/ 120Hz/
160Hz are sent to the subwoofer.
SUB-WPHASE REVERSE
(180°)/
NORMAL
(0°):Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [
THROUGH
] is selected for
[
LPFSUBWOOFER
].)
FADER R15
to
F15
(
0
):Adjusts the rear and front speaker output balance.
BALANCE L15
to
R15
(
0
):Adjusts the left and right speaker output balance.
VOLUMEOFFSET
For AUX:
–8
to
+8
(
0
) ; For other sources:
–8
to
0
:Presets the volume
adjustment level of each source. (Before adjustment, select the source
you want to adjust.)
SOUNDRECNSTR
(Sound
reconstruction)
ON
:Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in
audio data compression.;
OFF
:Cancels.
• [
SUB-W LEVEL
]/ [
SUBWOOFER SET
]/ [
LPF SUBWOOFER
]/ [
SUB-W PHASE
] is
selectable only if [
SWITCH PREOUT
] is set to [
SUBWOOFER
]. (
4
)
• [
SUB-WLEVEL
]/ [
LPFSUBWOOFER
]/ [
SUB-WPHASE
] is selectable only if
[
SUBWOOFERSET
] is set to [
ON
].
AUDIO SETTINGS
While listening to any source...
1 Press AUDIO to enter [
AUDIOCONTROL
].
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press .
Default:
XX
SUB-WLEVEL –15
to
+15
(
0
) Adjusts the subwoofer output level.
BASSLEVEL –8
to
+8
(
+6
)
Adjusts the level to memorize for each source. (Before
making an adjustment, select the source you want
to adjust.)
MIDLEVEL –8
to
+8
(
+5
)
TRELEVEL –8
to
+8
(
0
)
EQ PRO
BASS ADJUST BASS CTR FRQ
60HZ
/
80HZ
/
100HZ
/
200HZ
: Selects the center
frequency.
BASS LEVEL –8
to
+8
(
+6
):Adjusts the level.
BASS Q FACTOR 1.00
/
1.25
/
1.50
/
2.00
:Adjusts the quality factor.
BASS EXTEND ON
:Turns on the extended bass.;
OFF
:Cancels.
MID ADJUST MID CTR FRQ 0.5KHZ
/
1.0KHZ
/
1.5KHZ
/
2.5KHZ
:Selects the
center frequency.
MID LEVEL –8
to
+8
(
+5
):Adjusts the level.
MID Q FACTOR 0.75
/
1.00
/
1.25
:Adjusts the quality factor.
TRE ADJUST TRE CTR FRQ 10.0KHZ
/
12.5KHZ
/
15.0KHZ
/
17.5KHZ
:Selects the
center frequency.
TRE LEVEL –8
to
+8
(
0
):Adjusts the level.
JS_KWD_DPX206U_EN_EN_2.indd 10JS_KWD_DPX206U_EN_EN_2.indd 10 17/9/2014 10:13:39 AM17/9/2014 10:13:39 AM

Содержание

Похожие устройства

Скачать
Случайные обсуждения