Soundmax SM-SA6042 — инструкция по установке усилителя: шаги и советы [5/28]

Превью страниц Страница 5 / 28

SOUNDMAX SM-SA6042

Installation

MOUNTING:

 After reading precaution, decide where you are going to install the unit. Also, see the picture below.

 Once the location has been determined, remove the plastic decorative panels from left and right sides

of amplifier then place the amplifier in position. Using a felt tip pen or pencil mark the four holes to be

drilled for mounting. NEVER use the amplifier as a template for drilling. It is very easy to damage the

amplifier surface in manner.

 Remove amplifier with a getting back the plastic panels. Drill four 3.5 mm. Diameter holes into

mounting surface on steel panel. If you want mounting the MDF or wood panel, drill four 3.0m/m

diameter holes into mounting surface.

 If possible, test the system operating before final mounting of the amplifier.

 Mount the amplifier using the supplied 4 self-threading screws.

INSTALLATION DIAGRAM

Fig.1