Yamaha TDM 900 (S) (2004) [12/41] Cable routing

–4–

CABLE ROUTING

SPEC

A Fasten the handlebar switch lead (left) to the han-

dlebar with a band.

B Through the handlebar switch lead (left) and clutch

cable to the wire guide on the upper bracket.

C Fasten the main switch lead and immobilizer lead to

the wire guide with a clamp. There should be no

slack between main switch and wire guide. Cut the

clamp tip leaving 3 to 8 mm (0.12 to 0.31 in).

D Route the main switch lead through the cover 7 so

that it route beneath the handlebar switch lead (left).

E Route the clutch cable through the hole in front of

the head pipe on the frame.

F Route the handlebar switch lead (right) and throttle

cables (2 cables) through the cover 8.

G Route the brake hose through the guide.

H Always route the hose so that the brake hose

passes by the outside of the throttle cables.

I Route the handlebar switch lead (right), brake hose

and throttle cables through the wire guide of the up-

per bracket.

J Fasten the handlebar switch lead (right) to the han-

dlebar with a band.

K Fasten the main switch lead and immobilizer lead

with a clamp so that it faces the front side of the ve-

hicle.

L Fasten the horn lead to the front (left side) with a

clamp as shown in the drawing. Cut the clamp tip

leaving 3 to 8 mm (0.12 to 0.31 in).