Benq FP992 [50/54] Troubleshooting

50 Troubleshooting

Troubleshooting

Frequently Asked Questions (FAQ)

The image is blurred:

Read the Installation/Application section, and then select the correct resolution, refresh rate

and make adjustments based on these instructions.

How do you use a VGA extension cable?

Remove the extension cable for the test. Is the image now in focus? If not, optimize the image by

working through the instructions in the Installation/Adjustment section It is normal for blurring

to occur due to conduction losses in extension cables. You can minimize these losses by using an

extension cable with better conduction quality or with a built-in booster.

Does the blurring only occur at resolutions lower than the native (maximum) resolution?

Read the Installation/Adjustment section. Select the native resolution.

Pixel errors can be seen:

One of several pixels are permanently black, one or more pixels are permanently white, one

or more pixels are permanently red, green, blue or another color.

Read the Pixel error rates section.

The image has a faulty coloration:

It has a yellow, blue or pink appearance.

On the monitor, press “Enter” key and press W or X key to move to the “Recall” icon and press

“Enter” key to enter “Recall” sub menu. Press W or X key to select “Color Recall” and select “Yes”

in “Color Recall” sub menu, then press “Enter” key to recall to factory settings. If the image is still

not correct and the OSD also has faulty coloration, this means one of the three primary colors is

missing in the signal input. Now check the signal cable connectors. If any pin is bent or broken off,

please contact your dealer to get necessary support.

No image can be seen:

Is the prompt on the display illuminated in green?

If the LED is illuminated in green and there is a message “Out of Range” on the screen, this means

you are using a display mode that this monitor does not support, please change the setting to one

of the supported mode. Please read “Supported operating modes” section.

Is the prompt on the display illuminated in orange?

If the LED is illuminated in orange, the power management mode is active. Press any button on

the computer keyboard or move the mouse. If that does not help, check the signal cable

connectors. If any pin is bent or broken off, please contact your dealer to get necessary support.

Is the prompt on the display not illuminated at all?

Check the power supply mains socket, the external power supply and the mains switch.