Hyundai H-SS91 [12/48] Таблица команд пульта управления продолжение

Hyundai H-SS91 [12/48] Таблица команд пульта управления продолжение
Руководство пользователя и инструкция по установке
H-SS91
12
Светодиодная индикация состояний системы.
Охрана включена равномерные короткие вспышки
Включен пассивный иммобилайзер равномерные длинные вспышки
Включен Anti Hi'jack равномерные короткие вспышки
Предупредительный режим Anti Hi'jack быстро мигает
Охрана отключена не горит
Автопостановка/перепостановка быстро мигает
Valet'режим горит постоянно
Заблокирован ввод PIN кода двойные вспышки
Функция Кнопка Кнопка Кнопка Кнопка Кнопка Примечание
12 3MS
Включение режима ежедневного запуска двигателя 2 1 Зажигание ВЫКЛ.
в заданное время Синхронизация часов
выполнена.
Дистанционное глушение двигателя 2 1 Двигатель работает
под управлением
охранной системы.
Дополнительные функции двунаправленного пульта управления
Режим энергосбережения, отключение функции

пейджера
Блокировка кнопок пульта

Включение подсветки дисплея, проверка таймера
парковки
Отключение/включение звукового сигнала

Отключение/включение виброзвонка

Проверка состояния системы и текущего времени

на часах центрального блока
Вход в режим установки часов
3сек 3сек
Вход в режим установки времени ежедневного запуска
 
Синхронизация часов центрального блока с часами
3сек 3сек
пульта управления
Отключение пассивного иммобилайзера Номера кнопок задаются Зажигание ВКЛ.
программированием
Таблица команд пульта управления. (продолжение)
кратковременно нажать один раз
 кратковременно нажать два раза в интервале не более 3 секунд
3 сек. нажать и удерживать кнопку в нажатом состоянии не менее 3 секунд
12 последовательность нажатия кнопок
Two Way Car Alarm System HYUNDAI H-SS91
85
ENGLISH
User Software Switches
Function programming.
1. Follow through with transmitter programming and turn the ignition back on (do not press
the override switch in the above item 8!).
2. Press the override switch as many times as the number of the software switches group (first
digit).
3. Turn the ignition off/on.
4. Press the override switch as many times as the number of switch within the group (second
digit).
5. To enable the mode push button 1 of the transmitter, to disable it push button 2. If the
Software switch includes more than two states, follow the instruction within a respective
line of the table below.
6. After altering the switch mode value press the override switch to proceed to the next switch.
To proceed to the next switch group, turn the ignition off/on and repeat the above procedure.
7. To exit this programming mode, turn the ignition off and press the override switch.
SSW Software Switch Function Default Key#1 Key#2
# (LED ON) (LED OFF)
1'1 Passive ARM Mode OFF ON OFF
1'2 Lock with Passive Arm OFF ON OFF
1'3 Auto Re'arming ON ON OFF
1'4 Lock/Unlock With Ignition ON ON OFF
1'5 Siren Chirp ON/OFF ON ON OFF
2'2 2'way Handset Alarming on Disarm OFF ON OFF
2'3 All transceiver Page OFF ON OFF
2'4 Passive Arming Immobiliser OFF ON OFF
2'6 Door Operated Car Jacking Mode ON/OFF OFF ON OFF
2'7 Pre'warn sensor zone triggered indication on the transceiver ON ON OFF
3'1 PIN Access 1÷9 or 11÷99 Digit Code 1 Press 1'9 times to set Press 1'9 times to set
Tens Digit of Units Digit of
PIN PIN
3'2 Erase OTHER transmitter Codes (Save code of Remote Being Used) On Together
3'3 Return User Software Switches to Default On Together
3'4 Passive Immobiliser Disarm Button Button1
Press both buttons together to enter the setting.
Press both buttons once more to exit.
3'5 Triggering the alarm if Passive Immobiliser remains armed after OFF OFF
the alarm system disarming
LED Indication:
15 seconds – LED single flashes
30 seconds – LED double flashes
60 seconds – LED threefold flashes
3'6 Entry Alarm Delay OFF OFF
LED Indication:
15 seconds – LED single flashes
30 seconds – LED double flashes
4'6 Move to Installer Switches On Together
Press buttons in one of the following
sequence: 1; 2; 3; 4; 11; 12; 13;
14; 21; 22; 23; 24; 31;
32; 33; 34; 41; 42; 43;
4 4;
Press Button
required number of
times:
1 time – in 15 s
2 times – in 30 s
3 times – in 60 s
Press Button
required number of
times:
1 time – for 15 s
2 times – for 30 s

Содержание