Philips BDP7100 [2/2] Firmware upgrade history

Philips Consumer Lifestyle

Upgrading the firmware of your BD player

Note:

- Do not press any buttons or interrupt the mains supply during the upgrading

process, otherwise the player may become defective.

- Do not unplug or power off the set while upgrading in progress.

1. Press OPEN/CLOSE button to open the disc tray.

2. Insert the upgrade CD.

3. Press OPEN/CLOSE button to close the disc tray.

4. Please wait about 6 minutes while verifying.

5. Check the date of the Firmware version.

a. It will show that the new version will be S/W: 100422.01_xx

6. Press ‘OK’ button to choose ‘Yes’ for upgrade and please remove the disc on the tray, but DO

NOT close the tray

a. If you select ‘No’, BDP7100 will be automatically powered off.

b. If you don’t see above message box, try another disc. Generally, this is caused by

disc quality or a disc creation problem.

7. Please wait for about 10 minutes as the set is performing the upgrading.

8. The set will automatically close the disc tray and go to standby mode once the upgrade is

completed.

9. Press Standby button to turn on the set.

10. Please select the language you want with a corresponding number button.

11. Your product is successfully upgraded!

Confirm successful upgrade

1. After turning on the set, repeat step 1 to verify if the new firmware is correctly upgraded.

2. If you do not see the latest firmware is being upgraded, repeat Step 4 and Step 5.

Firmware Upgrade History

This firmware version includes the following changes:

Firmware Version 100422

 Resolve playback issue for Blu-ray disc Avatar and Cloudy with a chance of Meatballs

Firmware Version 090219

 Improve playback on some new BD movies

Firmware Version 080704

 Remove the software upgrade warning message appearing on some Blu-ray discs (e.g. Die

Hard 4) during the start of playback.

Firmware Version 071217

 Improve playback on some new BD movies

 Resolve 24Hz flickering issue

Step 4

Step 5