Ada GROUNDDRILL-2 В КОМПЛЕКТЕ СО ШНЕКОМ DRILL 150 А00418 [8/28] Ground drill 2 ground drill 2

MEASUREMENT FOUNDATION

GroundDrill-2

2. Wrong fuel mixture (too much oil in the fuel)

3. Dirty air filter

4. Unfavourable working conditions

These factors cause difficulties on the electrodes of spark plug.

If engine power drops, there are difficulties to start it or it runs bad at no load - first check the spark plug. Clean the spark plug if it´s

dirty. Check electrode gap. If necessary, make readjustment. Electrode gap should be 0.6mm.

Gear

Every 50 h of operation check lubricant level in the gear or gear system by way of disposal of priming plug for lubricant on the side of

gear. If you don´t see lubricant on the gear wheels, fill the gear 3/4 with universal lithium grease. Don´t fill the gear fully.

Fuel filter

Remove fuel from the fuel tank into an approved fuel container and take out a lign of fuel filter from the fuel

tank. Take out filter element and wash it with warm warter with detergent. Dry the element on the air.

Replace the fuel filter If it´s hard and very dirty.

Muffler cleaning

Demount muffler and spark gap switch (if you have it) and remove exhaust carbon from exhaust port or entrance of the muffler every

100h of operation.