Sea-Doo GTX Limited iS 2009 Инструкция по эксплуатации онлайн [186/555] 12053
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Sea-Doo GTX Limited iS 2009 Инструкция по эксплуатации онлайн [186/555] 12053

Sea-Doo GTX Limited iS 2009 Инструкция по эксплуатации онлайн [186/555] 12053
Section 02 ENGINE
Subsection 11 (CYLINDER BLOCK)
CRANKSHAFT PIN
RADIAL CLEARANCE
SERVICE LIMIT
0.09 mm (.0035 in)
Crankshaft Axial Clearance
When assembling the cylinder-block, measure the
crankshaft axial clearance.
1
R1503motr41A
2
1. Dial gaug
e
2. Crankshaft
CRANKSHAFT AXIAL CLEARANCE
NEW
0.08 mm - 0.22mm
(.003in - .009 in)
SERVICE LIMIT
0.35 mm (.014 in)
Crankshaft Installation
For inst
allation, reverse the removal procedure.
Pay atte
ntion to following details.
NOTE: Before installing the crankshaft, make
sure that the timing chain is on the crankshaft
and the chain guide has been installed first. Those
parts cannot be installed when the crankshaft is
in place.
NOTICE
Cranks
haft and balancer shaft marks
have to
be aligned.
R1503motr17A
12
1. Mark on balancer shaft
2. Mark on crankshaft
For correct installation of the connecting rods, re-
fer to
PISTONS AND CONNECTING RODS
in this
subsection.
NOTICE
It is absolutely necessary to follow
this procedure. Otherwise severe engine dam-
age can occur.
Insert thrust washers no. 4 as soon as crankshaft
is in place as per following illustration.
NOTICE
Never forget thrust washers on cen-
ter of crankshaft to control axial adjustment.
R1503motr09A
1
THRUST WASHER INSERT DIRECTION
1. Thru
st washer
NOTICE
Thrust washers have to be flush with
the cylinder block sealing surface.
smr2009-026 163

Похожие устройства

Скачать