Home
Главная
Sea-Doo
Гидроцикл
GTX Limited iS 2009
Инструкция по эксплуатации Страница: 510

Sea-Doo GTX Limited iS 2009 Инструкция по эксплуатации онлайн [510/555] 12053

Section 07 BODY AND HULL

Subsection 02 (BODY)

ssi2009-003-010_a

1. Rear locking tab

2.3 Lightly pull the top of LH trim and insert

the reel of the Speed-Tie unit in its location

as shown.

NOTE: Insert the unit with the marking out-

side.

ssi2009-003-011_a

1. Speed-

Tie unit reel

NOTICE

During Speed-Tie unit insertion,

be careful not to damage the LH trim.

3. To facilitate the locking mechanism insertion,

temporarily pull approximately 200 mm (8 in) of

rope between reel and locking mechanism.

4. Position the reel to the bottom of its cavity.

ssi2009-003-012_a

1. Push in the reel

5. Lift the lever and insert the locking mechanism

so that the lever is pointing toward the front of

vehicle.

ssi2009-00

3-013_a

1. Locking lever

2. Rope

6. Align the r

eel with the locking mechanism

and secure

them using four M6 x 45 tapered

screws.

7. Tighten screws to 4 N•m ± 1 N•m

(35 lbf•in ±9lbf•in).

ssi2009-003-014_a

1. M6 x 45 tapered screws

8. Install the cam trim.

8.1 Insert both cam trim retaining hooks into

locking mechanism openings.

ssi

2009-003-015_a

1. Retaining hooks

8.2 Press down the cam trim until it snaps into

place.

smr2009-042 487

Sea-Doo GTX Limited iS 2009 Инструкция по эксплуатации онлайн [510/555] 12053

Похожие устройства