Magio MG-320 [18/23] Страница 18
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Magio MG-320 [18/23] Страница 18

Magio MG-320 [18/23] Страница 18
ASSEMBLY YOUR STEAMER
1: Pick the unit out of the package, then
check and be sure all the parts are
available.
2: Fully extend the telescopic pole, to do so
first open the clips and
Loosen the poles, and then fully extend
the pole, at last close the clips on the pole
and to lock the poles as shown (figure 2).
Make sure that the pole is securely locked
into place and cannot be pushed down.
NOTE: The Telescopic Pole must be fully
extending during steamer operation to
ensure a free flow of steam through the
Hose.
3: To attach the hanger attachment, align
tabs in plastic hanger with grooves on pole
and push down, (Figure 3)
4: Insert the bottom of the Telescopic Pole
into the Pole Base (see Figure 4) in such a
way so that the Steam Nozzle Holder faces
the rear of the steamer (see Figure 1).
Pointing the Steam Nozzle Holder towards
the rear will ensure the stability of the
steamer when garments are hanging from
the Clothes Hanger Hook.
5: To attach the steam hose: Align the hose
nut with the hose base of top unit, and
then turning the hose nut clockwise to
tighten the hose with unit as shown (
figure 5), then place the steam nozzle to
the hanger.
CAUTION: To prevent steam from
causing bodily injury or damage to
surfaces, always hang the Steam Nozzle
on the Steam Nozzle Holder when not in
use. Do not lay the Hose on the floor as
condensation may
occur, causing unwanted water droplets
in the steam.
CAUTION: Pulling on the Hose with
excessive force will damage the hose,
resulting in steam leak.

Содержание

Похожие устройства

Скачать