Magio MG-320 [20/23] Страница 20
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Magio MG-320 [20/23] Страница 20

Magio MG-320 [20/23] Страница 20
PRESSING WITH STEAM
1. To steam a garment, place it on a clean,
rust-free clothes hanger, and place the
hanger on the Clothes Hanger Hook. For
horizontal steam mode place the clothing
on a clean, flat surface.
CAUTION: Be careful when handling
garments on the Clothes Hanger Hook.
Pulling on the garment with too much
force may cause the unit to tip.
CAUTION: Hot Steam may escape from the
small holes when steaming.
Use caution.
2. Grasp the Handle, and place the Steam
Nozzle at the bottom of the garment.
Steam will rise along the inside and
outside of the fabric, removing wrinkles.
Slowly slide the nozzle vertically, from the
bottom to the top of the garment.
NOTE: Do not allow kinks to form in the
hose at any time.
3. Remove the nozzle from the garment,
and smooth the fabric with your free hand.
4. Repeat steps 2 and 3 as necessary until
the fabric is wrinkle free.
3. Using horizontally keep steam 4 inches
above clothing.
4. To remove wrinkles from towels,
handkerchiefs, and napkins, drape over a
rod or towel rack, and gently steam.
5. Heavier fabrics may require repeated
steaming.
6. To remove stubborn wrinkles, steam
both sides of the fabric.
7. The Fabric Brush may also be used to
remove tough wrinkles.
QUICK STORAGE
1. Unplug the Power Cord.
2. Wrap the Hose around the Telescopic
Pole one time as shown in manual cover.
3. Hang the Steam Nozzle from the Steam
Nozzle Holder.
4. Loosen the top two of the Telescopic
Pole by turning them counter-clockwise.
5. Push down on the Pole Top; the pole will
collapse to a compact height.
6. Roll the unit to a convenient storage
location.
CLEANING AND LONG TERM STORAGE
We recommend you follow this procedure
at least once per week. Use of distilled or
de-mineralized water reduces the need
to for cleaning and prolongs the life of
your steamer.
1. Push the foot press button on “off”
position.
2. Unplug the unit from the power outlet.
3. Wait for the unit to cool completely (at
least 30 minutes).
4. Remove the Hose and the Telescopic
Pole, and set them aside.
5. Carry the unit to a sink or tub.
6. Remove and drain the Water Fill Tank.
Rinse the water tank with fresh water, and
drain completely.
7. Drain the steamer and emptying the
contents into the sink or tub. Tilt or upside
down the unit to facilitate removal of the
water.
8. Flush the unit by filling the Water
Reservoir and the Hose Base with fresh
water and draining completely.
9. Place the Water Fill Tank back on the
Water Reservoir.
10. Reattach the Telescopic Pole and Hose.
And Wipe the outside of the appliance
with a damp cloth
11. Follow steps 3-7 of the Quick Storage
procedure above.
12. If the unit surface is dirty, we
recommend to use a dry cotton cloth or
with some 30% alcohol solution to
cleaning.

Содержание

Похожие устройства

Скачать