![Suunto Vytec DS [43/86] Table 3 personal adjustment ranges](/img/pdf.png)
Suunto Vytec DS [43/86] Table 3 personal adjustment ranges
![Suunto Vytec DS [43/86] Table 3 personal adjustment ranges](/views2/1013544/page43/bg2b.png)
41
• cold exposure - water temperature less than 20 °C [68 °F]
• the diver is below average physical fi tness level
• diver fatigue
• diver dehydration
• previous history of DCI
• stress
• obesity
The Personal Adjustment Mode is indicated by a diver symbol and plus
signs (P0 = a diver, P1 = diver +, or P2 = diver ++). Section 4.3.1.1. ”Al-
titude Adjustment and Personal Adjustment Setting” describes how the
Personal Mode is adjusted.
This feature should be used to adjust the computer to be more conserva-
tive, according to personal preference, by entering the suitable Personal
Adjustment Mode with the help of Table 3.5. In ideal conditions, retain
the default setting, P0. If conditions are more diffi cult or other mentioned
factors which tend to increase the possibility of DCI exist, select P1 or
even the most conservative P2. As a result the dive computer adjusts
its mathematical model according to the entered Personal Adjustment
Mode, giving shorter no-decompression times (see section 6.1. ”Operat-
ing Principles”, Table 6.1 and 6.2).
TABLE 3.5. PERSONAL ADJUSTMENT RANGES
The Vytec also allows experienced divers who are willing to accept a
greater level of risk to adjust the RGBM model. The default setting is
RGB100 which gives full (100%) RGBM effect. Suunto strongly advises
to use full RGBM effect. Statistically very experienced divers have less
incidents with DCI. The reason for this is unknown, but it is possible that
some level of physiological and or psychological accommodation can
take place when you are very experienced as a diver. Thus for certain
divers and diving conditions you may want to set attenuated (50%) RGBM
Содержание
- Copyright trademark and patent notice 3
- Definition of warnings cautions and notes 3
- Iso 9001 4
- Pren 13319 4
- Warning 4
- Warning 5
- Warning 6
- Warning 7
- Introduction 10
- The suunto rgbm deep stop algorithm 10
- Emergency ascents 11
- Safety precautions 11
- Dive computer limitations 12
- Functions 12
- Getting acquainted 12
- Nitrox 12
- Making the vytec personal 13
- Push buttons 13
- Water contacts 14
- Installing the transmitter 15
- Wireless cylinder pressure transmission 15
- Pairing and code selection 16
- Warning 16
- Transmission data 17
- Activation and prechecks 19
- Before diving 19
- Diving with the vytec 19
- Battery indication 20
- Battery power indicator 20
- After battery check the low battery warning is indicated by the battery symbol fig 3 21
- Table 3 battery power indicator 21
- Temperature or an internal oxidation of the battery affects the battery voltage if the in strument is stored for a long period the low battery warning may be displayed even though the battery has enough capacity the low bat tery warning may also be displayed at low tem peratures even though the battery has enough capacity in warmer conditions in these cases repeat the battery check procedure 21
- The battery power indicator can always be seen when the dive mode is activated the electroluminescent backlight will be on during the battery check the following table and figure show the various warning levels 21
- Dive numbering shown during dive planning 22
- Dive planning plan 22
- Wireless transmitter battery indicator 22
- Recommended safety stop 23
- Safety stops 23
- User defi nable functions and alarms 23
- Mandatory safety stop 24
- Basic dive data 25
- Deep stops 25
- Diving in air mode 25
- Bookmark 26
- Cylinder pressure data 26
- Consumed bottom time cbt 27
- Ascent rate indicator 28
- Do not exceed the maximum ascent rate rapid ascents increase the risk of injury you should always make the mandatory and recommended safety stops after you have exceeded the maximum recommended ascent rate if this mandatory safety stop is not com pleted the decompression model will penalize your next dive s 28
- Red zone as all of the bars appear red zone your no decompression stop time has become zero and your dive has become a decompression stop dive for more information see section 3 decompression dives 28
- Table 3 ascent rate indicator 28
- The ascent rate is shown graphically along the right side of the display as follows 28
- Warning 28
- When the maximum allowed ascent rate is exceeded the fi fth slow warning segment and the stop sign appear and the depth reading starts to blink indicating that the maximum ascent rate has been exceeded continuously or that the current ascent rate is signifi cantly above the allowed rate 28
- Whenever the slow warning segment and the stop sign appear fig 3 3 you should immediately slow down your ascent when you reach the depth zone between 6 m to 3 m 20 ft to 10 ft the stop and ceiling depth labels will advise you to make a mandatory safety stop wait until the warning disappears fig 3 4 you should not ascend shallower than 3 m 10 ft with the mandatory safety stop warning on 28
- Decompression dives 29
- Safety stops and deep stops 29
- Ceiling ceiling zone floor and decompression range 30
- Warning 30
- Display above the floor 31
- Display at the ceiling zone 31
- Display below the floor 31
- Warning 31
- Before diving 32
- Display above the ceiling 32
- Diving in nitrox mode 32
- If you ascend above the ceiling during a de compression stop a downward pointing arrow will appear and a continuous beeping starts fig 3 9 in addition an error warning er reminds you that you have only three minutes to correct the situation you must immediately descend to or below the ceiling 32
- If you continue to violate the decompression the dive computer goes into a permanent error mode in this mode the instrument can only be used as a depth gauge and timer you must not dive again for at least 48 hours see also section 3 error conditions 32
- Default nitrox settings 33
- Oxygen displays 33
- Gas change multiple breathing gas mixes 35
- Oxygen limit fraction olf 35
- Diving in gauge mode 36
- At the surface 37
- Surface interval 37
- Dive numbering 38
- Flying after diving 39
- Table 3 warning symbols 39
- Audible and visual alarms 40
- Oxygen alarms in nitrox mode 41
- Warning 41
- Altitude adjustment 42
- High altitude dives and personal adjustment 42
- Personal adjustment 42
- Table 3 altitude adjustment ranges 42
- Table 3 personal adjustment ranges 43
- Error conditions 44
- Omitted decompression 44
- Table 3 rgbm model settings 44
- Menu based modes 45
- The use of the menu based functions 45
- Exit quit 46
- The list of the menu based modes 46
- Logbook and dive profi le memory 1 logbook 47
- Memories and data transfer 1 memory 47
- Dive history memory 2 history 50
- Dive profile memory prof 50
- Data transfer and pc interface 3 tr pc 51
- Dive simulator 1 simdive 52
- Simulation mode 2 simul 52
- Dive planning simulator 2 simplan 53
- Set modes 3 set 53
- Altitude adjustment personal adjustment rgbm set tings and safety stop deep stop 1 adj mode 54
- Dive parameter settings 1 set dive 54
- Dive time alarm setting 2 d alarm 55
- Maximum depth alarm setting 3 max dpth 55
- Nitrox oxygen settings 4 nitrox 55
- Adjusting time 1 adj time 56
- Setting time 2 set time 56
- Adjusting daily alarm 3 t alarm 57
- Adjusting date 2 adj date 57
- Backlight setting 1 light 57
- Setting preferences 3 set pref 57
- Dive computer model setting 5 model air nitrox gauge 58
- Dive computer units setting 2 units 58
- Profi le sample rate setting 4 rec 58
- Wireless transmission settings 3 hp 58
- Care and maintenance 59
- Care of your dive computer 59
- Important information 59
- Caution 60
- Maintenance 60
- Water resistance inspection 60
- Battery kit 61
- Battery replacement 61
- Caution 61
- Computer battery 61
- Battery replacement 62
- Tools required 62
- Assemble the shorter part of the strap use the spring bar tool or small screwdriver to compress the spring bars make sure that the spring bars get fully seated so they will not come off their holes 64
- Caution 64
- Check after the fi rst dives for possible moisture under the transparent battery compartment lid indicating a leak 64
- Console model 64
- Note it is advisable to contact an authorized suunto dealer for trans mitter battery replacement it is imperative that the change is made in a proper manner to avoid any leakage of water into the transmitter 64
- Refi t the dive computer in the console according the instructions of the console 64
- Wireless transmitter battery replacement 64
- Battery kit 65
- Caution 65
- Operating principles 66
- Technical description 66
- Altitude diving 67
- Table 6 no decompression time limits min for vari ous depths ft for the first dive of a series 67
- Table 6 no decompression time limits min for vari ous depths m for the first dive of a series 67
- The atmospheric pressure is lower at high altitudes than at sea level after traveling to a higher altitude the diver will have additional nitrogen in his body compared to the equilibrium situation at the original altitude this additional nitrogen is released gradually in time and equilibrium is reached it is recommended that you acclimate to the new altitude by waiting at least three hours before making a dive 67
- Surface intervals 68
- Suunto reduced gradient bubble model rgbm 68
- Oxygen exposure 69
- Technical specification 70
- Warranty 73
- Suuntosports com 74
- System requirements 74
- Communities 75
- My suunto 75
- Suuntosports com sections 75
- Getting started 76
- Sport forums 76
- Glossary 77
- Disposal of the device 82
- 4 set dive options 83
- Activate the timekeeping display 83
- Add surface interval hours 83
- Add surface interval minutes 83
- Adj date 83
- Adj mode 83
- Air nitrox gauge 83
- Alarm depth 83
- Alternative displays 83
- Altitude a0 a1 a2 83
- Ascend descend 83
- Backlight 83
- Backlight on time 83
- Bookmark in the profile memory alternative display 83
- D alarm 83
- Data transfer 83
- Deepstop off 1 2 83
- Dive mode 1 m 83
- Dive n 1 page 1 83
- Dive n 2 page 1 83
- Dive n page 1 83
- Dive n page 1 page 4 profile page 2 83
- Dive simulation surface mode 83
- Dt minutes 83
- H am pm 83
- History 83
- Increase depth decrease depth 83
- Lcd battery check 83
- Max dpth 83
- Memory options 83
- Menu based main mode 83
- Menu based submode 1 menu based submode 2 83
- Metric imperial 83
- Minutes 83
- Mix 1 mix 2 on off mix 3 on off 83
- Mode options 83
- Modes and operations 83
- Nitrox 83
- Nitrox gauge display 83
- On off 83
- Page 3 83
- Personal p0 p1 p2 83
- Reserve air alarm 10 200 bar 83
- Rgbm rgb 50 100 83
- Sample rate 10 20 30 60 s 83
- Set 1 memory 2 simul 83
- Set options 83
- Set pref options 83
- Set preferences 1 set dive 2 set time 83
- Set time options 83
- Simplan 1 simdive 83
- Simulate diving 83
- Simulate planning 83
- Simulation options 83
- T alarm 1 adj time 1 adj time 83
- Time keeping and stand by mode surface mode diving mode 83
- Tr pc 1 logbook 83
- Www suunto com 86
Похожие устройства
- Patriot Garden Т 5.0/400F PG Alaska Инструкция по эксплуатации
- D-Link DSL-2760U/BRU/D Инструкция по эксплуатации
- Yamaha DGX-530 Инструкция по эксплуатации
- LG DT-S600NY Инструкция по эксплуатации
- Dekok UKA-1319 Инструкция по эксплуатации
- Maxwell MW-1451 Инструкция по эксплуатации
- Suunto Vyper2 Инструкция по эксплуатации
- Yamaha DGX-620 Инструкция по эксплуатации
- D-Link DSL-G604T Инструкция по эксплуатации
- Patriot -Garden Т 5.0/400F PG Arizona Инструкция по эксплуатации
- Supra BSS-4000 Инструкция по эксплуатации
- LG DT-S585Y Инструкция по эксплуатации
- Suunto Vyper Air Инструкция по эксплуатации
- Yamaha DGX-630 Инструкция по эксплуатации
- Efco МZ 2060C GX160 Инструкция по эксплуатации
- D-Link DSL-2540/BRU Инструкция по эксплуатации
- Soehnle 65106 Инструкция по эксплуатации
- Elikor Сапфир 60 Инструкция по эксплуатации
- LG DT-S585NYG Инструкция по эксплуатации
- Suunto Vyper Инструкция по эксплуатации
Скачать
Случайные обсуждения