Suunto Stinger Инструкция по эксплуатации онлайн [28/120] 12765

After activation of the Dive Mode or after diving, the Stinger will automatically

switch to show the time keeping display within 5 minutes to conserve the battery

power, if you do not press any buttons. However, the dive computer functions will

remain active until it has calculated that all residual nitrogen has off-gassed. This

may take up to 100 hours, as described in chapter 7.1. "Operating Principles".

However, SUUNTO recommends to turn on the Dive Mode before diving to check

the settings, battery warning, etc. and for dive planning.

3.1.2. BATTERY POWER INDICATOR AND LOW BATTERY

WARNING

This dive computer has a unique graphic Battery Power Indicator designed to give

you an advance notice of impending need to change the battery.

The Battery Power Indicator can always be seen as the Dive Mode is activated. The

electroluminescent backlight will be on during the battery check. The following

Table and Figure show the various warning levels.