Home
Главная
Panasonic
Видеокамера
WV-SP105
Инструкция по эксплуатации Страница: 33

Panasonic WV-SP105 [33/64] Configure the vmd settings vmd area

Configure the VMD settings [VMD area]

Click the [VMD area] tab on the "Alarm" page. (☞Pages13and14:Howtodisplay/operatethesetupmenu)

The video motion detection areas can be set on this page.

Up to 4 areas can be set. When motion is detected in the set area, it will be regarded as an alarm.

Important:

 • Thealarmoccurrenceindicationbutton(☞ page 8) will be displayed when motion is detected by the VMD func-

tion.

 • Thealarmoccurrenceindicationbuttonwillbedisplayedwhenreceivinganalarminputofacommandalarm

 • Dependingonthenetworkenvironment,notificationmaybedelayedevenwhen"Realtime"isselectedfor

"Alarm status update mode" on the "Basic" page (☞ page 18).

 • Themotiondetectionfunctionisnotthededicatedfunctiontopreventthefts,fires,etc.Wearenotresponsible

for any accidents or damages occurring in case.

Off: Does not change the image quality upon alarm

detection.

Default:Off

[Image quality upon alarm detection]

Image quality can be changed upon an alarm occur-

rence. Select the image quality from the following.

0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low

Default: 5 Normal

[Area]

When selecting a VMD area in the screen, it will be

numbered as area 1.

[Status]

Select"On"or"Off"todeterminewhetherornotto

activate each VMD area.

On: Activates the respective VMD area.

Off: Inactivates the respective VMD area.

Default:Off

[Detection area]

Adjust the size of the VMD area using the slider. The

smaller the selected value is, the higher the sensitivity

of VMD area becomes. The current value (1-10) will be

displayed on the right of the slider.

Default: 1

[Detection sensitivity]

Adjust the sensitivity of motion detection in the VMD

area using the slider. The settings can be configured for

each area individually. The larger the value is set, the

higher the sensitivity level becomes.

The current value (1 (low) - 15 (high)) will be displayed

below the slider.

Default: 8

[Delete] button

Click the [Delete] button corresponding to the area to

be deleted. The outline of the selected area will be

deleted.

Panasonic WV-SP105 [33/64] Configure the vmd settings vmd area

Содержание

Похожие устройства