InFocus IN2124 [2/2] Pa239 4800 03

InFocus IN2124 [2/2] Pa239 4800 03
Lamp Module Replacement Instructions: SP-LAMP-069/SP-LAMP-070
IN122ST, IN124ST, IN126ST
IN112, IN114, IN116, IN114ST, IN122, IN124, IN126,
IN2124, IN2126
4. Loosen the captive screws that attach the lamp housing to the projector.
NOTE: If the projector is installed on a ceiling mount, be careful not to drop the lamp module once the captive screws are loosened.
5. Carefully lift the lamp straight up, off of the alignment pins; being careful not to pinch the lamp connector. Dispose of the lamp in an environmentally proper manner.
6. Install the new lamp module, aligning the pins properly. Be careful not to pinch the lamp connector.
7. Tighten the screws. (NOTE: If the pins have not been aligned properly, the screws will not tighten securely.)
8. Replace the lamp door by reversing Step 3 and locking it back into place.
9. Replace the lamp door screws and tighten securely.
10. Plug in the power cord and press the Power button to turn the projector back on.
11. To reset the lamp hour timer, navigate to the Advanced Menu > Status/Service menu and select Reset Lamp Hours.
Image
Setup
Status/Service
Basic Menu
Source Info...
Projector Info...
Reset Lamp Hours...
Factory Reset...
Service Code...
(
Advanced Menu
)
MDL: IN112
FW: 0.13
PA239-4800-03
*PA239-4800-03*
009-1403-03