Smeg FAB50X [16/22] Switching off the refrigerator

User instructions

7.2 Switching off the refrigerator

If the refrigerator is to remain out of use for a long time disconnect it from the mains.

Then empty the compartments and dry any residual moisture which has collected. Leave the door ajar to

ensure that moisture and stagnant air do not cause unpleasant odours.

7.3 Practical energy saving advice

- Install the refrigerator in a cool, well ventilated place, protected from direct sunlight and well away

from heat sources;

- Do not put hot food in the fridge or freezer. Wait for foods and drinks to cool to room temperature

before placing them on the shelves;

- Reduce the number of times that the door(s) is/are opened and the length of time they remain open

to prevent the units from heating up excessively;

- Clean the condenser (rear of the refrigerator) periodically to prevent the appliance from losing

efficiency;

- On models equipped with the rapid freezing function, do not leave this function activated for longer

than absolutely necessary;

- If the refrigerator remains unused for a long period, it is advisable to empty the appliance and

disconnect it from the mains;

- Thaw frozen foods in the body of the refrigerator in order to take advantage of the cold stored in the

frozen foods, which will be transferred to the refrigerator if this procedure is used.

7.4 Noises during operation

The fridge freezer cools by means of a compression system. In order to maintain the preset temperature

inside the refrigerator and freezer sections, the compressor comes into operation in response to the level

of cooling required, and may operate continuously if necessary. When the compressor starts to function,

it creates a buzzing noise which generally diminishes in intensity after a few minutes. Another normal

refrigerator operating noise is a gurgling due to the coolant flowing through the pipes in the circuit. This

noise is normal and does not indicate an appliance malfunction. If it becomes too loud, this may mean

that there are other causes. Checks must then be made to ensure that:

- the refrigerator is properly levelled on the floor and does not vibrate when the compressor is in

operation: if this is not the case, adjust the feet it's equipped with;

- The drawers, shelves and trays on the door are correctly positioned in their holders: if they are not,

put them in correctly;

- Bottles and containers on the various shelves are stable and not touching each other:

otherwise, the vibration resulting from the compressor's operation could cause a certain amount of

noise;

- Do not place the fridge in such a way that it is in contact with furniture or other household

appliances.

7.5 Identifying and eliminating any operational faults

Your new refrigerator is designed and built to strict quality standards. The aim of this section is to enable

you to identify the origin of any operational fault that may arise, before contacting Smeg's technical

support service.