Smeg FAB50P [18/22] Troubleshooting
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Smeg FAB50P [18/22] Troubleshooting

Smeg FAB50B [18/22] Troubleshooting
42
User instructions
8. TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE PROBABLE SOLUTION
Noisy during operation - see 'noises during operation'
section
The compressor starts to function too
often or functions continuously:
- insufficient cooling of the
compressor and the condenser:
- increase in surrounding
temperature;
- doors opened often or for long
periods;
- freezer loaded with too many fresh
foods
- check that the back of the freezer
is properly ventilated as indicated
in section “9.1” and that the
condenser is not excessively dirty;
- freeze less food in one go;
The compressor does not function: - supply cable not connected to the
electricity supply;
- socket not providing any
electricity.
- connect the supply cable;
- contact your electricity supply
company
Refrigerator section not cooled
sufficiently
- inside temperature setting
thermostat set too low (1-2)
(provides a higher temperature
inside the appliance);
- frequent or prolonged door
opening;
- the door does not close properly
- increase in surrounding
temperature.
- Turn the regulator to an
intermediate setting.
- open the door less frequently and
for as little time as possible;
- check that the foods are arranged
on the shelves correctly and are
not preventing the door from
closing properly, and that the floor
under the refrigerator is level;
- check that the seal is closing
properly and is not damaged.
Door hard to open just after closing: - if you attempt to open the door
again just after closing it
(especially the freezer door),
considerable strength is required.
This is due to the low pressure
created by the cooling of the warm
air which has entered the freezer.

Содержание

Похожие устройства

Скачать