Freggia LTF31076C [10/32] Electrical connection
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Freggia LTF31076C [10/32] Electrical connection

Freggia LTF31076C [10/32] Electrical connection
CAUTION
Whenever the product has been lying horizontally during transportation, it should
be left to stand upright for at least six hours before it is switched on, otherwise it may
be noisy when it is in operation.
Before plugging the appliance in, make sure that the power supply voltage
corresponds to the value shown on the product data plate (“See the section Electrical
connection”).
Plug the appliance into the electricity mains supply. The display will ash, showing
the default temperature set by the manufacturer (7°C for the refrigerator area, -16°C
for the freezer area).
SWITCHING ON THE APPLIANCE
The product is turned on by touching the symbol ( ) for 0.5 seconds, action followed
by an audible signal (1 beep).
It is possible to switch o only the refrigerator compartment by touching the symbol
(
) for 4 seconds (the «--» symbol appears on the display).
The product is turned o by touching the symbol (
) for 5 seconds, followed by an
audible signal (2 beep) and two dash ( ) on the display.
NOTE: in this case, the refrigerator compartment and all the display symbols
are also automatically switched o.
SETTING THE TEMPERATRE OF THE FREEZER AREA
The freezer display indicates the actual internal temperature of the freezer
compartment ranging from +20°C to -40°C; if the temperature exceeds +20°C, the
1 GREEN AND YELLOW EARTH
2 BLUE NEUTRAL
3 BROWN LIVE
4 13 AMP FUSE
5 CABLE CLAMP
WARNING!
THIS APPLIANCE MUST BE EARTHED.
STARTING THE APPLIANCE
symbol «H» appears on freezer display. Freezer temperature can be adjusted by
touching the (
) symbol; temperatures between -16°C and -24°C can be set.
When the refrigerator is switched on, if you touch the (
) symbol the set temperature
value will ash on the display for 6 seconds.
To set a new temperature, touch the (
) symbol and, while the display is ashing,
touch the same symbol (
) repeatedly until the desired temperature value has been
reached; the new setting will be stored after the display has stopped ashing (6
seconds).
SETTING THE TEMPERATURE OF THE REFRIGERATOR AREA
The refrigerator display indicates the actual internal temperature of the refrigerator
compartment ranging from 0°C to 19°C; if the temperature exceeds 19°C, the symbol
«H» appears on the display. Refrigerator temperature can be adjusted by touching
the (
) symbol; temperatures between 2°C and 7°C can be set.
When the refrigerator is switched on, if you touch the (
) symbol the set temperature
value will ash on the display for 6 seconds. To set a new temperature, touch the (
)
symbol and, while the display is ashing, touch the same symbol (
) repeatedly until
the desired temperature value has been reached; the new setting will be stored after
the display has stopped ashing (6 seconds).
NOTE! With room temperatures between 20°C and 25°C, we suggest setting
the refrigerator temperature at +5°C and the freezer temperature at -18°C.
The freezer and refrigerator temperature is also depending on how often the
doors are opened and the quantity of food contained inside the product.
CHECKING THE PROGRAMMED TEMPERATURE
If the ( ) symbol (refrigerator area) and the ( ) symbol (freezer area) are touched
once, the programmed temperature will ash on the display for 6 seconds; after, the
actual temperature inside the compartments will be displayed. The set functions
remain stored in the memory of the appliance, even in the event of a power cut or
when the appliance is disconnected from the electricity supply; upon start-up, the
last temperature setting for both compartments will ash on the display.
HOLIDAY FUNCTION
The “HOLIDAY” function may be used during periods of prolonged inactivity (for
example, if all users go on holiday). This function saves electricity as it takes into
account the fact that the door of the appliance will not be opened at all during this
period and maintains a temperature inside the refrigerator which is suitable for the
storage of food. To activate this function, simply touch the text “HOLIDAY” for at least
0.5 seconds; the text will be lit up in white. The function may only be deactivated
manually, by touching the text “HOLIDAY” for 0.5 seconds. While the appliance is
operating in “HOLIDAY” mode, all other settings are temporarily disabled.
SUPER FUNCTION
The Super function was designed to reduce the temperature inside the refrigerator
compartment in the shortest possible time; if you touch the text “SUPER” for at least
0.5 seconds the function will be activated for a period of 7 hours, during which time
the text “SUPER” will be lit up in white. After this 7-hour period, the Super function
will be deactivated automatically. However, if you wish to manually deactivate the
function before the 7-hour period has elapsed, simply touch the text “SUPER” for at
least 0.5 seconds; when the function has been deactivated the text “SUPER” will no
longer be illuminated.
While the appliance is operating in Super mode, all other freezer compartment
settings are temporarily disabled.
PRE-ALARM MODE AND FREEZER TEMPERATURE
The pre-alarm mode is activated when the temperature inside the freezer
compartment reaches a value higher than -12°C (for example, -11°C). This may occur
in the following situations:
• a large amount of unfrozen food has been placed in the freezer (see freezing
modes);
• the door has been open for an extended period of time;
• the electricity supply has been cut o for a prolonged period of time;
• the appliance has malfunctioned.
The pre-alarm mode is indicated by the temperature appearing intermittently on
the freezer display, by the ashing white ALARM symbol and by the audible alarm.
The audible alarm may be disabled by touching the ALARM text; in this case the
pre-alarm mode indicator of the ashing temperature on the display remains active
and the ALARM text will remain lit in a xed manner instead of ashing. The pre-
• The electrical wiring must comply with the norms on electrical safety.
• Check that the voltage on the rating plate corresponds to the voltage in your
home.
• The appliance must have an earth according to the laws in force. The
manufacturerdeclines all responsibility for any damage to persons, animals or
things as a resultof failure to comply with these norms.
• If the plug and the socket are not of the same kind, ask a qualied technician
tochange the plug.
WARNING!
Do not use adaptors, multiple sockets or extensions (Fig. 11).
IMPORTANT! If the appliance is switched o and then immediately
switched on again, the compressor activates after about 10 minutes. This
is a normal operating procedure for the appliance.
10
STARTING THE APPLIANCE
ELECTRICAL CONNECTION
ON / OFF
FRIDGE DISPLAY
FREEZER DISPLAY
FRIDGE COMPARTMENT POWER SWITCH (ON/OFF)
FRIDGE TEMPERATURE ADJUSTMENT
FRIDGE DOOR OPEN ALARM (DEACTIVATION)
FREEZER TEMPERATURE ADJUSTMENT
FREEZER DOOR OPEN ALARM (DEACTIVATION)
HOLIDAY FUNCTION
SUPER FUNCTION
PRE-ALARM - ALARM
FREEZER TEMPERATURE

Содержание

Похожие устройства

Скачать