![Panasonic HDC-SD1GC-S Silver [3/124] ª cards that you can use with this unit](/img/pdf.png)
Panasonic HDC-SD1GC-S Silver [3/124] ª cards that you can use with this unit
![Panasonic HDC-SD1GC-S Silver [3/124] ª cards that you can use with this unit](/views2/1099711/page3/bg3.png)
3
VQT1A34
-If you see this symbol-
ª Indemnity concerning recording
content
The manufacturer shall in no event be liable for
the loss of recordings due to malfunction or
defect of this unit, its accessories or recordable
media.
ª Carefully observe copyright laws
Recording of pre-recorded tapes or discs or
other published or broadcast material for
purposes other than your own private use
may infringe copyright laws. Even for the
purpose of private use, recording of certain
material may be restricted.
ª Cards that you can use with this
unit
SD Memory Card and SDHC Memory Card
For the purposes of these operating instructions,
the following cards are referred to as “the SD
card”.
SD Memory Card
SDHC Memory Card
≥SDHC Logo is a trademark.
≥miniSD Logo is a trademark.
≥“AVCHD” and the “AVCHD” logo are
trademarks of Matsushita Electric Industrial
Co., Ltd. and Sony Corporation.
≥Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
≥HDMI, the HDMI Logo and the High-Definition
Multimedia Interface are the registered
trademarks or trademarks of HDMI Licensing
LLC.
≥HDAVI Control™ is a trademark of Matsushita
Electric Industrial Co., Ltd.
≥LEICA is a registered trademark of Leica
microsystems IR GmbH and DICOMAR is a
registered trademark of Leica Camera AG.
≥Microsoft
®
, Windows
®
and DirectX
®
are either
registered trademarks or trademarks of the
Microsoft Corporation in the United States and/
or other countries.
≥Microsoft product screen shot(s) reprinted with
permission from Microsoft Corporation.
≥IBM and PC/AT are registered trademarks of
International Business Machines Corporation of
the U.S.
≥Intel
®
, Pentium
®
and Celeron
®
are the
registered trademarks or trademarks of the
Intel Corporation in the United States and other
countries.
≥Other names of systems and products
mentioned in these instructions are usually the
registered trademarks or trademarks of the
manufacturers who developed the system or
product concerned.
This product is licensed under the AVC patent
portfolio license for the personal and non-
commercial use of a consumer to (i) encode
video in compliance with the AVC Standard
(“AVC Video”) and/or (ii) decode AVC Video that
was encoded by a consumer engaged in a
personal and non-commercial activity and/or was
obtained from a video provider licensed to
provide AVC Video. No license is granted or shall
be implied for any other use. Additional
information may be obtained from MPEG LA,
LLC. See http://www.mpegla.com
.
Information on Disposal in other Countries
outside the European Union
This symbol is only valid in the
European Union.
If you wish to discard this
product, please contact your
local authorities or dealer and
ask for the correct method of
disposal.
VQT1A34_GC_ENG.book 3 ページ ２００７年１月２７日 土曜日 午後１時４６分
Содержание
- Hdc sd1 1
- High definition video camera 1
- Operating instructions 1
- Caution 2
- Figure a figure b 2
- Information for your safety 2
- Warning 2
- ª cards that you can use with this unit 3
- ª carefully observe copyright laws 3
- ª indemnity concerning recording content 3
- Before using 4
- Contents 4
- Playback 4
- Recording 4
- Before using with a computer 7 5
- Card management 5
- Connection and recognition 4 5
- Contents 5
- Editing 5
- Editing scenes 9 5
- Editing still pictures 1 5
- Formatting 4 5
- Functions that cannot be used simultaneously 108 5
- Installation 2 5
- Menus and indications 00 5
- Others 5
- Troubleshooting 09 cautions for use 15 explanation of terms 18 specifications 20 5
- Using hd writer ver1 e for sd1 7 if using macintosh 9 5
- With a computer 5
- With a tv 5 playback using viera link hdavi control 2 dubbing images onto a connected dvd recorder or video device 4 with a printer pictbridge 5 5
- With other products 5
- About the sdhc memory card supplied with this unit and the compatibility of the recorded motion pictures 6
- Before using 6
- Features of the high definition video camera 6
- High definition images 6
- Very clear high definition pictures 6
- ª what is the avchd 6
- Connecting with the av cable 7
- Connecting with the component cable and the av cable 7
- Watching high definition images 7
- ª when connecting to a tv that does not have a hdmi terminal 7
- Automatic input switching 8
- Turning the power on and off 8
- Using the remote control for the tv for playback 8
- ª other linked operations 8
- Internal microphones 9
- Listening in 5 channel surround sound 9
- Important note 10
- Saving the data on the sd card 10
- ª the sd media storage 10
- ª what you can do with hd writer 10
- Accessories 11
- Optional accessories 11
- Parts identification and handling 12
- ª about the cooling fan 12
- Attach the battery pack holder kit 15
- Battery cable cover 15
- Close the battery cover 15
- Open the battery cable cover 15
- Open the battery cover 15
- Flip the belt 16
- Put your hand through the grip belt 16
- Replace the belt 16
- Rotate the lens hood counter clockwise a to remove it in order to attach it place into slot b and then rotate it clockwise c 16
- Using grip belt lens hood 16
- Attaching the lens cap included in the filter kit vw lf43ne optional 17
- Pass the end of the lens cap cord through the belt 17
- Pass the lens cap through the loop 17
- To attach or remove the lens cap hold both sides of the lens cap with the tips of your finger and thumb 17
- Tripod receptacle 17
- Adjust the angle of the lcd monitor as desired 18
- Place your finger on lcd monitor open part and pull the lcd monitor out in the direction of the arrow 18
- Using the lcd monitor 18
- Using the remote control 18
- Caution 19
- Concerning the button type battery 19
- Set the button type battery with its i mark facing upward and then put the battery holder back in place 19
- While pressing the stopper a pull out the battery holder 19
- ª install a button type battery 19
- ª remote control usable range 19
- Cards that you can use with this unit 20
- ª about sd cards that you can use for motion picture recording 20
- ª handling precautions 21
- ª sd speed class rating class 2 21
- Charging the battery 22
- Connect the ac cable to the ac adaptor and the ac outlet 22
- Put the battery on the battery mount by aligning the mark and then securely plug it in 22
- ª charging lamp 22
- Caution 23
- Close the battery cover 23
- Insert the battery until it clicks paying attention to the direction of the battery 23
- Inserting removing the battery 23
- Inserting the battery 23
- Open the battery cover 23
- Remove the battery 23
- Removing the battery 23
- Charging time and recordable time 24
- ª about batteries that you can use for this unit 24
- ª charging time 24
- ª recordable time 24
- Connect the ac cable to the ac adaptor 25
- Connect the dc cable to the ac adaptor 25
- Connecting to the ac outlet 25
- Open the terminal cover on this unit and connect the dc cable to the dc input terminal dc in 9 v 25
- ª about the remaining battery capacity indication 25
- How to turn off the power 26
- How to turn on the power 26
- Selecting a mode turning the unit on off 26
- Set the mode dial to off 26
- While pressing the lock release button set the mode dial to or 26
- Close the lcd monitor while the mode dial is set to 27
- On and press the cursor button 27
- Press the menu button then select setup 27
- Quick start 27
- Turning the power on and off with the lcd monitor 27
- ª to turn off the power 27
- ª to turn on the power 27
- Insert remove the sd card into from the card slot 28
- Inserting removing an sd card 28
- Open the lcd monitor 28
- Open the lcd monitor and then open the card slot cover 28
- Securely close the card slot cover 28
- Set the mode dial to off 28
- ª to cancel quick start 28
- Basic operations 29
- How to use the cursor button 29
- Move the cursor button up down left or right to select an item or scene and then press the cursor button to set it 29
- ª card access lamp 29
- ª concerning the sd card 29
- Move the cursor button up down left or right to operate 30
- Move the cursor button up down left or right to select the scene to be played back and press the cursor button 30
- Move the cursor button up left or right to select an item 30
- Operations during playback 30
- Operations during recording 30
- Press the centre of the cursor button and icons will be displayed on the screen 30
- Rotate the mode dial to select 30
- About the operation icons displayed in each mode 31
- Recording mode 31
- Playback mode in motion picture playback 32
- Playback mode in still picture playback 32
- Help mode 33
- Move the cursor button right or press the cursor button 33
- Move the cursor button right to select 33
- Move the cursor button up left or right to select the desired icon 33
- Move the cursor button up or down in order to select the desired top menu a 33
- Press the cursor button to display the icon 33
- Rotate the mode dial to select 33
- To exit the help mode 33
- Using the menu screen 33
- While stopped press the menu button 33
- Move the cursor button right or press the cursor button 34
- Move the cursor button up or down in order to select the desired item 34
- Move the cursor button up or down in order to select the submenu item 34
- Operating with remote control 34
- Press the cursor button to enter the selection 34
- Press the menu button 34
- Press the menu button to exit the menu screen 34
- Select a menu item 34
- To exit the menu screen 34
- To get back to the previous screen 34
- Changing the date and time display style 35
- Changing the display style 35
- Clock set 35
- Move the cursor button left or right to select the item to be set then move the cursor button up or down to set the desired value 35
- Press the cursor button to enter the selection 35
- Press the menu button then select basic 35
- Rotate the mode dial to select 35
- Setting date and time 35
- Yes and press the cursor button 35
- Adjusting lcd monitor 36
- Adjusting the brightness and the colour level of the lcd monitor 36
- Lcd set 36
- Move the cursor button up or down to select the item to be adjusted then press the cursor button and move the cursor button left or right to make the adjustment 36
- Press the menu button then select language and press the centre of the cursor button 36
- Press the menu button then select setup 36
- Select english and press the centre of the cursor button 36
- Switching the language 36
- To recharge the built in lithium battery 36
- Yes and press the cursor button 36
- Changing the picture quality on the lcd monitor 37
- Dynamic or normal and press the cursor button 37
- Lcd ai 37
- Press the menu button then select setup 37
- ª in order to increase the brightness of the entire lcd monitor press the power lcd button 37
- Basic camera positioning 38
- Before recording 38
- Recording 38
- Anti ground shooting ags 39
- On or off and press the cursor button 39
- Rotate the mode dial to select press the menu button then select video 39
- Turning the ags function on off 39
- ª about auto mode 39
- Open the lcd monitor 40
- Press the recording start stop button to start recording 40
- Recording motion pictures 40
- Rotate the mode dial to select 40
- To end the recording 40
- ª screen indications in the recording mode 41
- ª when recording stops suddenly during motion picture recording 41
- Desired item and press the cursor button 42
- Press the menu button then select video 42
- Rec mode 42
- Recording modes recordable time available for the motion picture 42
- Rotate the mode dial to select 42
- Open the lcd monitor 43
- Press the photo shot button fully to take the picture 43
- Press the photo shot button halfway in order to adjust focusing for auto focusing only 43
- Recording still pictures jpeg 43
- Rotate the mode dial to select 43
- To record still pictures clearly 43
- A bc d e f g h 44
- ª about the focus indication 44
- ª about the screen indications only when the photo shot button is pressed halfway 44
- ª concerning the focusing area 44
- On or off and press the cursor button 45
- Press the menu button then select picture 45
- Shtr effect 45
- Switching the shutter effect on off about simultaneous recording recording still pictures while recording motion pictures 45
- While recording motion pictures press the photo shot button fully press to the bottom to take the picture 45
- Approximate number of recordable pictures on an sd card 46
- Desired item and press the cursor button 46
- Pict quality 46
- Picture quality 46
- Picture quality approximate number of recordable pictures on an sd card 46
- Press the menu button then select picture 46
- ª picture quality and number of recordable pictures 46
- D zoom 47
- Desired item and press the cursor button 47
- Digital zoom function 47
- Move the zoom lever 47
- Press the menu button then select basic 47
- Rotate the mode dial to select 47
- Various recording functions 47
- Zoom in out function 47
- About using the zoom microphone function 48
- On and press the cursor button 48
- Press the menu button then select video 48
- Recording yourself 48
- Rotate the lcd monitor towards the lens side 48
- Rotate the mode dial to select 48
- Zoom mic 48
- Backlight compensation function 49
- Fade in fade out function 49
- Move the cursor button left to select 49
- Move the cursor button up to select 49
- Press the cursor button then move the cursor button down to display the icon shown in the illustration 49
- Press the recording start stop button 49
- Rotate the mode dial to select 49
- This is for protecting a backlit subject from being darkened 49
- To return to normal recording 49
- Colour night view function 50
- Fade colour 50
- Move the cursor button up to select 50
- Press the cursor button then move the cursor button down to display the icon shown in the illustration 50
- Press the menu button then select video 50
- Rotate the mode dial to select 50
- This allows recording in dark locations 50
- To cancel fading 50
- To cancel the colour night view function 50
- To select the colour for fade in out 50
- White or black and press the cursor button 50
- Move the cursor button left to select 51
- Move the cursor button right to select 51
- Press the cursor button then move the cursor button down to display the icon shown in the illustration 51
- Rotate the mode dial to select 51
- Soft skin mode 51
- Tele macro function 51
- This is for bringing only what you want to record into focus to take close ups 51
- This makes skin colours appear softer for a more attractive appearance 51
- To cancel the soft skin mode 51
- To cancel the tele macro function 51
- Move the cursor button up to select ø 52
- Press the cursor button then move the cursor button down to display the icon shown in the illustration 52
- Press the photo shot button 52
- Rotate the mode dial to select 52
- Self timer recording 52
- This is for recording shots of yourself as well 52
- To stop the timer midway through 52
- Built in flash 53
- Move the cursor button left to select ß 53
- Press the cursor button then move the cursor button down to display the icon shown in the illustration 53
- Press the photo shot button 53
- Rotate the mode dial to select 53
- When the flash is not used 53
- Desired item and press the cursor button 54
- Flash level 54
- Image stabilizer function 54
- Move the cursor button right to select 54
- On and press the cursor button 54
- Press the cursor button then move the cursor button down to display the icon shown in the illustration 54
- Press the menu button then select basic 54
- Press the menu button then select picture 54
- Red eye reduction function 54
- Rotate the mode dial to select 54
- This is for reducing image shakes during recording 54
- To adjust the brightness of the flash 54
- To cancel the image stabilizer function 54
- Desired item and press the cursor button 55
- Guide line function 55
- Guide lines 55
- On and press the cursor button 55
- Press the menu button then select basic or play setup 55
- Press the menu button then select video 55
- Rotate the mode dial to select 55
- Rotate the mode dial to select or rotate the mode dial to and then select the motion picture playback tab 55
- This is for reducing the wind noise coming into the microphone when recording 55
- This is for viewing the slope and the balance of the image while recording or playing back 55
- To cancel the guide line function 55
- To cancel the wind noise reduction function 55
- Wind cut 55
- Wind noise reduction function 55
- Agc or set and press the cursor button 56
- Mic level 56
- Microphone level 56
- Move the cursor button left or right to adjust the microphone input level 56
- Press the centre of the cursor button to set and then press the menu button to finish the setting 56
- Press the menu button then select video 56
- On and press the cursor button 57
- Press the menu button then select advanced 57
- Rotate the mode dial to select 57
- This is for displaying the parts that are too bright 57
- To cancel the zebra display 57
- To return to automatic setting 57
- Zebra display 57
- Colour bar 58
- Colour bars 58
- Desired item and press the cursor button 58
- Manual recording functions 58
- On and press the cursor button 58
- Press the menu button then select advanced 58
- Press the menu button then select basic 58
- Rotate the mode dial to select 58
- Scene mode 58
- Set the auto manual focus switch to manual 58
- This is for displaying a colour bar to check the colour tone 58
- This is for recording in various situations 58
- To cancel the colour bar 58
- Manual focus adjustment 59
- Mf assist 59
- Move the switch down and set it to focus position 59
- On and press the cursor button 59
- Press the menu button then select advanced 59
- Rotate the mode dial to select 59
- Set the auto manual focus switch to manual 59
- To cancel the scene mode function 59
- About the mf assist function 60
- Move the cursor button left or right to bring the subject into focus 60
- Move the cursor button left or right to select the white balance mode 60
- Move the cursor button up to select 60
- Rotate the mode dial to select 60
- Set the auto manual focus switch to manual 60
- This is for recording in natural colours 60
- To restore to the automatic adjustment 60
- White balance 60
- Move the cursor button up to select 61
- Select fill the screen with a white subject 61
- To restore to the automatic adjustment 61
- To set the white balance manually 61
- ª about the black balance adjustment 61
- ª about the white balance sensor 61
- Manual iris gain adjustment 62
- Manual shutter speed adjustment 62
- Manual shutter speed aperture adjustment 62
- Move the cursor button left or right to make the adjustment 62
- Move the cursor button left or right to select aperture or shutter speed 62
- Rotate the mode dial to select 62
- Set the auto manual focus switch to manual 62
- To restore to automatic adjustment 62
- Motion picture playback 63
- Move the cursor button to operate 63
- Playback 63
- Press the cursor button 63
- Press the cursor button up and then left to select the motion picture playback tab 63
- Rotate the mode dial to select 63
- Select the scene to be played back 63
- Button on the remote control during playback 64
- Move and hold the cursor button right slow motion pictures will be played back in reverse when you move and hold the cursor button left 64
- Move the cursor button up during playback to pause the playback 64
- Operation is possible with the remote control only 64
- Press the 64
- Skip playback to the start of a scene 64
- Slow motion playback 64
- ª about motion picture compatibility 64
- ª operating with the remote control 64
- Frame by frame playback 65
- Move the cursor button right the frames will be advanced one at a time in the reverse direction when you move the cursor button left 65
- Move the cursor button up during playback to pause the playback 65
- Move the volume lever to change the volume level 65
- To adjust the volume 65
- ª operating with the remote control 65
- By date and press the cursor button 66
- On and press the cursor button 66
- Play mode 66
- Playing back motion pictures by date 66
- Press the menu button then select play setup 66
- Repeat play 66
- Repeat playback 66
- Select the date for playback then press the cursor button 66
- Select the scene to be played back 66
- To cancel the repeat playback function 66
- To return to playing back all the scenes 66
- On and press the cursor button 67
- Press the cursor button up and then right to select the still picture playback tab 67
- Press the menu button then select play setup 67
- Resume play 67
- Resuming the previous playback 67
- Rotate the mode dial to select 67
- Select the file to be played back 67
- Still picture jpeg playback 67
- To cancel the resume playback function 67
- Move the cursor button to operate 68
- Press the cursor button 68
- ª about still picture compatibility 68
- Deleting multiple scenes from the thumbnail display 69
- Deleting scenes 69
- Deleting scenes one at a time 69
- Editing 69
- Editing scenes 69
- Move the cursor button up or down to select all scenes or select and press the cursor button 69
- Press the button during playback 69
- Press the button while the thumbnail view screen is displayed 69
- Select the scene to be deleted then press the cursor button 69
- When the confirmation message appears select yes then press the cursor button 69
- Press the button 70
- Press the menu button then select play setup 70
- Protecting scenes 70
- Rotate the mode dial to select and then select the motion picture playback tab 70
- Scene protect 70
- Select the scene to be protected and then press the centre of the cursor button 70
- This is for preventing scenes from being deleted by mistake 70
- To complete editing 70
- To complete the settings 70
- To continue deleting other scenes 70
- When the confirmation message appears select yes then press the cursor button 70
- Yes and press the cursor button 70
- Deleting still pictures 71
- Editing still pictures 71
- Press the menu button then select play setup 72
- Protecting still pictures 72
- Rotate the mode dial to select and then select the still picture playback tab 72
- Scene protect 72
- Select the file to be protected and then press the centre of the cursor button 72
- This is for preventing still picture files from being deleted by mistake 72
- To complete editing 72
- To complete the settings 72
- To continue deleting other files 72
- When the confirmation message appears select yes then press the cursor button 72
- Yes and press the cursor button 72
- ª deleting still picture files recorded on an sd card by other products 72
- Dpof set 73
- Dpof setting 73
- Move the cursor button up or down to select the number of prints then press the cursor button 73
- Press the menu button then select play setup 73
- Rotate the mode dial to select and then select the still picture playback tab 73
- Select the file to be set and then press the centre of the cursor button 73
- Set and press the cursor button 73
- This is for writing the printing data on an sd card 73
- To cancel all dpof settings 73
- To complete the settings 73
- ª what is dpof 73
- Card management 74
- Format card 74
- Formatting 74
- Formatting an sd card 74
- Press the menu button then select setup 74
- When the confirmation message appears select yes then press the cursor button 74
- Yes and press the cursor button 74
- 3 and press the cursor button 75
- Difference in picture quality depending on the terminal used for connection 75
- Playback on tv 75
- Press the menu button then select setup 75
- Tv aspect 75
- With a tv 75
- With other products 75
- ª to display the on screen information on the tv 75
- ª to watch images with a 16 9 aspect ratio on a regular tv 4 3 75
- Connect this unit and a tv with the hdmi cable optional 76
- Connecting with a hdmi cable optional 76
- Select the input channel on the tv 76
- Set the mode dial to to turn on the power 76
- Start playback on this unit 76
- ª if the image or audio from this unit is not output on the tv 76
- Desired item and press the cursor button 77
- Hdmi output resolution 77
- Hdmi resolution 77
- Press the menu button then select setup 77
- ª about the settings when connecting with hdmi 77
- Listening in 5 channel sound 78
- Audio in 79
- Component out 79
- Component video in 79
- Connect this unit and a tv with the component cable supplied and the av cable supplied 79
- Connecting with the component cable supplied and the av cable supplied 79
- Desired item and press the cursor button 79
- Press the menu button then select setup 79
- Select the input channel on the tv 79
- Set the mode dial to to turn on the power 79
- Start playback on this unit 79
- ª about the setting when connecting the component terminals 79
- ª if the image or audio from this unit is not output on the tv 80
- Audio in 81
- Change the input channel on the tv 81
- Connect this unit and a tv with the av cable supplied 81
- Connecting with the av cable supplied 81
- Set the mode dial to to turn on the power 81
- Start playback on this unit 81
- Video in 81
- ª if the image or audio from this unit is not output on the tv 81
- Connect this unit and a panasonic tv viera compatible with viera link with a hdmi cable optional 82
- On and press the cursor button 82
- Playback using viera link hdavi control 82
- Press the menu button then select setup 82
- Set so that viera link is activated on the connected tv 82
- Set the mode dial to to turn on the power 82
- Viera link 82
- Operate with the remote control for the tv 83
- To cancel viera link hdavi control 83
- Audio in 84
- Change the input channel on the video device and tv 84
- Connect this unit and a video device 84
- Dubbing images onto a connected dvd recorder or video device 84
- Set the mode dial to to turn on the power 84
- Start playback on this unit then start recording on the connected device 84
- To stop dubbing 84
- Video in 84
- Connect this unit and a printer 85
- Insert an sd card with recorded images in this unit and then set the mode dial to to turn on the power 85
- Move the cursor button up or down to select the desired number of prints then press the cursor button 85
- Press the menu button to display the pictbridge menus 85
- Select a file to be printed then press the cursor button 85
- Select the date print setting on date print 85
- Select the paper size setting on paper size 85
- With a printer pictbridge 85
- Select print 86
- Select the layout setting on page layout 86
- When you stop printing halfway 86
- Yes and press the cursor button to print the pictures 86
- Before using with a computer 87
- What you can do with a computer 87
- With a computer 87
- Contents on provided cd rom 88
- ª directx 88
- ª hd writer ver1 e for sd1 88
- End user license agreement 89
- Operating environment 90
- ª operating environment for hd writer ver1 e for sd1 90
- ª operating environment for the card reader function mass storage 91
- Check the contents then click 92
- Click hd writer ver1 e for sd1 92
- Click next 92
- Insert the cd rom into the computer 92
- Installation 92
- Installing hd writer ver1 e for sd1 92
- On the top right of the window 92
- Read carefully through the end user license agreement then place a check beside i accept the terms of the license agreement if you agree to them and click next 92
- Add or remove programs applications 93
- All programs programs 93
- Click finish 93
- Control panel 93
- Hd writer ver1 e for sd1 93
- Manual pdf format 93
- Panasonic 93
- Reading the operating instructions of the software applications 93
- Select hd writer ver1 e for sd1 then click change remove change or remove or add remove 93
- Select start 93
- Settings 93
- Software application uninstallation 93
- Connect this unit and a computer 94
- Connection and recognition 94
- Connection and recognition procedures 94
- Insert an sd card with recorded images in this unit and then set the mode dial to to turn on the power 94
- Insert the battery and connect the ac adaptor 94
- About the computer display 95
- Double click the folder that contains the files on the removable disk dcim 95
- Drag and drop the files onto the destination folder on the computer hard disk 95
- Set the mode dial on the unit to and connect the unit to the computer 95
- ª copying still pictures recorded on the sd card to a computer 95
- Click the hardware tab then click device manager 96
- Control panel 96
- Double click the icon in task tray displayed on the computer 96
- Performance and maintenance 96
- Select start 96
- Select usb mass storage device and click stop 96
- Settings 96
- System 96
- To disconnect usb cable safely 96
- Verify the following items are displayed 96
- Verifying the unit is correctly recognised by the computer 96
- ª if the driver has been recognised properly 96
- ª if the driver has not been recognised properly 96
- All programs programs 97
- Click the copy to pc button 97
- Connect this unit and a computer 97
- Hd writer 97
- Hd writer ver1 e for sd1 97
- Insert an sd card with recorded images in this unit and then set the mode dial to to turn on the power 97
- Insert the battery and connect the ac adaptor 97
- Panasonic 97
- Select start 97
- Using hd writer ver1 e for sd1 97
- ª copying data on an sd card to the hard disk of the computer 97
- Click on the top right and select the folder with the image data you want to copy to the sd card 98
- Click the start copying button 98
- Click the write data to media button 98
- Select start writing to copy the images from the hard disk of the computer to the sd card 98
- ª writing back to an sd card 98
- Connect this unit to the personal computer via the supplied usb cable 99
- Double click no_name or untitled displayed on the desktop 99
- If using macintosh 99
- Using a drag and drop operation move the pictures you want to acquire or the folder storing those pictures to any different folder on the personal computer 99
- ª copying still pictures on pc 99
- ª operating environment for the card reader function mass storage 99
- ª to disconnect usb cable safely 99
- Menu list 100
- Menus and indications 100
- Others 100
- Recording menus 100
- ª advanced 100
- ª basic 100
- ª language 100
- ª picture 100
- ª setup 100
- ª video 100
- Playback menus motion picture playback 101
- Playback menus still picture playback 101
- ª language 101
- ª play setup 101
- ª setup 101
- Menus related to advanced and setup 102
- ª beep sound 102
- ª demo mode 102
- ª display 102
- ª initial set 102
- ª power save 102
- ª rec lamp 102
- Indications 103
- ª recording indications 103
- ª confirmatory indications 104
- ª pc connection indications 104
- ª playback indications 104
- Messages 105
- About recovery 107
- Functions that cannot be used simultaneously 108
- Troubleshooting 109
- ª unit operations 109
- ª when connected to another device 114
- ª with a computer 114
- About this unit 115
- Cautions for use 115
- About the ac adaptor 116
- About the battery 116
- About the minisd card 117
- About the sd card 117
- Lcd monitor 117
- About condensation 118
- Automatic white balance 118
- Causes of condensation 118
- Explanation of terms 118
- What to do with the lens is fogged up 118
- Auto focus 119
- White balance 119
- Specifications 120
- Matsushita electric industrial co ltd 124
- Vqt1a34 124
- Web site http panasonic net 124
Похожие устройства
- Panasonic RR-US450E-H Инструкция по эксплуатации
- Panasonic DVD-S53 EE-S Инструкция по эксплуатации
- Panasonic NN-ST 337 MZPE Инструкция по эксплуатации
- Caiman BTR400S Инструкция по эксплуатации
- Panasonic SC-NC9 EE-K Инструкция по эксплуатации
- Panasonic SC-PMX2 E-S Инструкция по эксплуатации
- Caiman BTR750S Инструкция по эксплуатации
- Panasonic DVD-S2 EE-S Инструкция по эксплуатации
- Caiman JET75EX Инструкция двигателя
- Caiman JET75EX Инструкция по эксплуатации
- Panasonic KX-TGF320RUM Инструкция по эксплуатации
- Caiman VARIO 60S D3 Инструкция двигателя
- Caiman VARIO 60S D3 Инструкция по эксплуатации
- Panasonic KX-TGF310RUM Инструкция по эксплуатации
- Panasonic KX-TG1611RUW Инструкция по эксплуатации
- Panasonic KX-TS2382RUB Инструкция по эксплуатации
- Caiman NEO 50S C3 Инструкция по эксплуатации
- Panasonic RC-Q720EP9-S Silver Инструкция по эксплуатации
- Caiman VARIO 70S Plow TWK+ Инструкция двигателя
- Caiman VARIO 70S Plow TWK+ Инструкция по эксплуатации