Kramer Galil6-O [10/18] Installing the galil 6 o

Galil 6-O - Installing the Galil 6-O

4 Installing the Galil 6-O

This section explains how to:

 Choose the best location for your speakers (see Section 4.1)

 Install the speaker wires (see Section 4.2)

 Install the mounting brackets (see Section 4.3)

 Setup an array installation (see Section 4.4)

 Connect the Galil 6-O (see Section 4.5)

4.1 Choosing the Best Location

Before installing the speakers:

 Experiment by placing the speakers in different locations before finally

deciding on the most suitable location

 Be sure that the wall type is appropriate for the mounting brackets, that is,

either solid wood, bricks, concrete, hollow building blocks, or wood studs

 Check that the mounting location is free of obstructions, such as electrical

piping, AC ducts or water lines, and so on

4.2 Installing the Speaker Wires

To install the speakers, do the following:

1. Prepare the wires for the speakers:

 Cut the wires to similar lengths

For achieving high quality sound

 Measure the length from each speaker to the receiver, and cut the

wires accordingly, adding some access wire length to let you easily

remove the speakers from the bracket without having to disconnect the

input wires

2. Strip the ends of the wires to expose a length of approximately 3/8 inch.