Kramer Dolev 8 [11/14] Installing the speaker

Dolev 8 - Installing the Speaker

5.4 Installing the Speaker

To install the speaker, do the following:

1. Connect one of the following inputs:

 An unbalanced input (for example, a computer sound card, portable

player or DVD/CD player – C-A35M/2RAM) to the UNBALANCED

INPUT RCA connector

 A balanced input (for example, a professional mixer or audio interfaces)

to the BALANCED INPUT 6.35mm TRS connector

 A balanced input (for example, a professional mixer or audio interfaces)

to the BALANCED INPUT XLR connector

2. Set the volume on the Dolev 8 to 12 o’clock (0dB)

3. Connect the power.

4. Set the volume on the input source to the minimum.

5. Switch the Dolev 8 power on.

6. On the input source, increase the volume control slowly until the desired level

is achieved.

7. Adjust the high frequency response according to the room conditions:

 A heavily dampened room requires raised high frequencies

 A resonant room requires reduction of the high frequencies