Sony UP-DR100 [9/28] Operation
![Sony UP-DR100 [9/28] Operation](/views2/1158626/page9/bg9.png)
Operation
Loading the Paper and Ink Ribbon
9
Operation
Loading the Paper and
Ink Ribbon
Before using the printer for the first time, confirm that
you have all of the accessories, and assemble them as
described on page 6.
After connecting the printer as described on page 8, load
the paper and ink ribbon following the steps below to
prepare for actual printing.
These steps are not required every time you print, but
only as necessary.
Notes
• The printing pack contains an ink ribbon and one
paper roll. Use the ink ribbon and the paper roll in the
carton as a set. Do not mix with other varieties of
ribbon or paper. (“Ink Ribbon and Paper” on page 23.)
• Each printing pack allows you to print the following
number of sheets.
• The number of printouts that can be printed may not
be guaranteed if you replace the ink ribbon and paper
before the ink ribbon and paper run out.
• Place the paper roll vertically with flanges facing up
and down. If you place the paper roll horizontally, the
paper may roll around and fall. This may cause an
injury.
• Hold the right and left flanges of the paper roll so that
you do not drop it, because it is heavy. Dropping may
result in an injury and may cause accumulation of dust
on the paper. Any dust on the printing surface will
result in poor printout quality.
• A built-in IC chip is located around one side of the
flange of the paper roll. Be careful not to hurt the IC
seal or give it a shock. If you do, you may not be able
to use the ink ribbon any more.
• Do not detach the blue and pink spools of the ink
ribbon until you start loading the ink ribbon
• A built-in IC chip is located around one side of the
pink spool. Be careful not to hurt the IC seal or give
it a shock. If you do, you may not be able to use the
ink ribbon any more.
Loading the paper and ink ribbon
When you use the printer for the first time, load the
paper and ink ribbon.
For detailed information on how to remove the paper
and ink ribbon, see page 13.
Note
Be careful that your fingers or clothes don’t get caught
in the front door or front door catch.
Print
pack
UPC-R35/
UPC-R35A
UPC-R46/
UPC-R46A
UPC-R57/
UPC-R57A
UPC-
R68A
Printing
capacity
400 350 205 185
Print
size
89
×127 mm 102×152
mm
127×178
mm
152×204
mm
3.5
×5
inches
4×6 inches 5×7 inches 6×8
inches
Flanges
Hold the right and left flanges with both hands.
Pink spool
Blue spool
IC seal in which the IC
chip is built
Содержание
- Digital color printer 1
- Instructions for use 1
- Up dr100 1
- For the customers in the u s a 2
- Owner s record 2
- Warning 2
- Introduction 3
- Miscellaneous 3
- Operation 3
- Preparation 3
- Table of contents 3
- Basic application example 4
- Features 4
- Introduction 4
- Part names and functions 4
- Assembly 6
- Preparation 6
- Supplied accessories 6
- Dip switch settings 7
- Paper and ink ribbon for detailed information on how to install the ink ribbon and paper see loading the paper and ink ribbon on page 9 7
- Scsi id setting set the printer scsi id so that it is different from all other devices on the scsi bus if two devices have the same scsi id malfunctions may result 7
- Set the scsi id with the dip switches on the side panel the dip switches are set as follows when shipped from the factory 7
- Terminator on off setting when the printer is connected as the terminating device on the scsi bus set the terminator to the on position otherwise set it to the off position 7
- The scsi id is set to 1 as the factory setting 7
- Connections 8
- Loading the paper and ink ribbon 9
- Operation 9
- Removing the ink ribbon and paper 13
- Printing from the computer 14
- 6 11 2 7 8 9 10 16
- Adjusting gray balance 16
- Displaying the quantity of pages printed 18
- Displaying the remaining amount of paper or ink ribbon 18
- Displaying the total quantity of pages printed and remaining amount of ink ribbon or paper 18
- Displaying the firmware version of the printer 19
- Installation 20
- Miscellaneous 20
- On condensation 20
- Precautions 20
- Safety 20
- After you replace the paper roll with the new one 21
- Cleaning 21
- On transporting the printer 21
- When the cabinet becomes dirty 21
- When the following symptoms appears 22
- Ink ribbon and paper 23
- Optional accessories 24
- Scsi 2 interface 24
- Specifications 24
- Error and warning messages 25
- Error and warning messages appear on the information display under the following conditions please take the remedial actions shown next to the message to correct the condition 25
- Error messages 25
- Warning messages 25
- When a problem occurs the alarm indicator on the front panel lights in red and an error message appears on the information display please take the remedial actions shown next to the message to correct the condition 25
- When a warning condition occurs the warning message appears but the alarm indicator does not light the remedy is listed below next to each message 25
- Before submitting the product for repair please recheck the following if the unit still does not operate properly contact your supplier or nearest sony service center 26
- Troubleshooting 26
Похожие устройства
- Sony ZS-R100CP Инструкция по эксплуатации
- Аквафор Модерн исп. 1 Инструкция
- Sony DVP-SR450K Инструкция по эксплуатации
- Аквафор B300 Инструкция
- Sony SAL1118 Инструкция по эксплуатации
- Аквафор Модерн исп. 2 Вкладыш
- Аквафор Модерн исп. 2 Инструкция
- Аквафор Топаз Инструкция
- Sony SAL100 M28 Инструкция по эксплуатации
- Аквафор Универсал Инструкция
- Sony SAL135 F18Z Инструкция по эксплуатации
- Аквафор Модерн исп. 4 (умягчающий) Вкладыш
- Аквафор Модерн исп. 4 (умягчающий) Инструкция
- Sony SAL14TC Инструкция по эксплуатации
- Аквафор B300 (бактерицидный) Инструкция
- Sony SAL16 F28 Инструкция по эксплуатации
- Sony SAL2470Z Инструкция по эксплуатации
- Аквафор КПД 1 Руководство по эксплуатации
- Sony SAL20TC Инструкция по эксплуатации
- Аквафор КПД 2 Руководство по эксплуатации