![APC smart-ups srt6kxli [15/35] Connect equipment](/img/pdf.png)
APC smart-ups srt6kxli [15/35] Connect equipment
![APC smart-ups srt6kxli [15/35] Connect equipment](/views2/1159294/page15/bgf.png)
13Smart-UPS On-Line SRT5K/6K Tower/Rack-Mount 3U/4U
Connect Equipment
Note: The UPS batteries will charge to 90% capacity in the first three hours of normal operation. Do not expect
full battery runtime capability during this initial charge period.
1. Connect equipment to the outlets on the rear panel of the UPS.
Refer to “Controllable Outlet Groups” on page 21.
2. Connect the UPS to the building utility power.
Turn the UPS On/Off
The first time the UPS is turned on the Setup Wizard screen will run. Follow the prompts to configure UPS
settings. Refer to “Configuration” on page 17.
To turn on the UPS and all connected equipment, press the Power
ON/OFF button on the display panel. Follow the
prompts to either turn the UPS on immediately or after a delay, then press OK.
NOTE: When there is no input power and the UPS is off, the cold start feature can be used to turn on the UPS and
connected equipment using battery power.
To perform a cold start press the Power ON/OFF button.
The display panel will illuminate and the Power ON/OFF button will illuminate red.
To turn on the output power press the Power ON/OFF button again. Select the prompt Turn ON with NO AC and
press OK.
To turn output power off, press the Power
ON/OFF button. Follow the prompts to either turn the UPS off
immediately or after a delay, then press OK.
NOTE: Once the AC power has been turned off the UPS will continue operating on battery power for a short
period of time. To remove power completely press the Power ON/OFF button. Follow the prompt to select Internal
Power Off, then press OK.
CAUTION
DAMAGE TO EQUIPMENT OR PERSONNEL
• Disconnect the mains input circuit breaker before installing or servicing the UPS or connected equipment.
• Disconnect internal and external batteries before installing or servicing the UPS or connected equipment.
• The UPS contains internal and external batteries that may present a shock hazard even when disconnected from the
mains.
• UPS AC hardwired and pluggable outlets may be energized by remote or automatic control at any time.
• Disconnect equipment from the UPS before servicing any equipment.
Failure to follow these instructions can result in equipment damage and minor or moderate injury.
Содержание
- On line srt 1
- Operation manual 1
- Smart ups 1
- Caution 3
- General information 3
- Product description 3
- Safety messages 3
- Deenergizing safety 4
- Electrical safety 4
- Safety information 4
- Battery safety 5
- General information 5
- Hardwire safety 5
- Environmental 6
- Humidity 6
- Maximum elevation operating 6
- Physical 6
- Product overview 6
- Protection class 6
- Specifications 6
- Srt5k model 6
- Srt6k model 6
- Storage 6
- Temperature operating 6
- Battery 7
- Battery type 7
- Electrical 7
- Models rating 7
- Output 7
- Replacement battery module 7
- Front panel features 8
- Note refer to the table key to identify rear panel features on page 10 that provides a key to the callout numbers for the rear panel graphics depicted in this manual 9
- Rear panel features 9
- Smart ups on line srt5k 6k tower rack mount 3u 4u 9
- Srt5kxli srt5krmxli 9
- Srt5kxlt srt5krmxlt 9
- Group 1 15 amp max 10
- Smart ups on line srt5k 6k tower rack mount 3u 4u 8 10
- Srt5krmxlw hw 10
- Srt5kxlt iec srt5krmxlt iec 10
- Su0880a 10
- Su0881a 10
- Group 1 10 amp max 11
- Group 1 15 amp max 11
- Group 1 20 amp max 11
- Group 3 16 amp max 11
- Group 3 30 amp max 11
- Smart ups on line srt5k 6k tower rack mount 3u 4u 11
- Srt6kxli srt6kxrmxli 11
- Srt6kxlt iec srt6krmxlt iec 11
- Srt6kxlt srt6krmxlt 11
- Su0882a 11
- Su0883a 11
- Su0884a 11
- Key to identify rear panel features 12
- Caution 13
- Srt5k 6kxlt srt5k 6kxlt iec models 13
- Srt5kxli srt5krmxli 13
- Srt5kxli srt6kxli models 13
- Srt5kxlt srt5krmxlt srt5kxlt iec srt5krmxlt iec 13
- Srt6kxli srt6krmxli 13
- Srt6kxlt srt6krmxlt srt6kxlt iec srt6krmxlt iec 13
- System wiring voltage current full load nominal external input circuit breaker typical 13
- Wire size typical 13
- Wiring specifications 13
- Srt5krmxlw hw 14
- System wiring voltage current full load nominal external input circuit breaker typical 14
- Wire size typical 14
- Caution 15
- Connect equipment 15
- Turn the ups on off 15
- Output 16
- Ups display interface 16
- Ups status information 16
- Battery status icons 17
- Controllable outlet group icons 17
- Menu overview 17
- Operation mode icons 17
- Ups display interface operation 17
- Lcd display interface angle adjustment 18
- Available on the advanced menu screens based on ups state 19
- Configuration menus overview 19
- Menus are subject to change depending on the installed firmware version 19
- Options displayed will vary options displayed will vary based on connected accessories 19
- Configuration 20
- Function description 20
- Menu type 20
- Startup configuration 20
- Ups settings 20
- Voltage ac setting 20
- Ac setting 21
- Bypass lower acceptable voltage 21
- Bypass mode 21
- Bypass upper acceptable voltage 21
- Config menu ups 21
- Configure these settings at any time using the display interface or the network management web interface 21
- Default setting 21
- General settings 21
- Green mode 21
- Low runtime warning 21
- Output frequency 21
- Output frequency slew rate 21
- Output lower acceptable voltage 21
- Output upper acceptable voltage 21
- Parameters default value options description 21
- Reset energy meter 21
- Self test schedule 21
- Beeper volume 22
- Config menu battery 22
- Config menu display 22
- Install date 22
- Language 22
- Lcd back light 22
- Lcd setting 22
- Menu type 22
- Parameters default value options description 22
- Replacement battery alarm time 22
- Replacement notification time 22
- Config menu network manage 23
- Config menu outlets 23
- Ip address 23
- Ip address mode 23
- Loadshed on battery 23
- Loadshed on runtime 23
- Loadshed overload 23
- Loadshed runtime 23
- Loadshed time on battery 23
- Minimum return runtime 23
- Parameters default value options description 23
- Power off delay 23
- Power on delay 23
- Reboot duration 23
- Connect controllable outlet groups 24
- Controllable outlet groups 24
- Controllable outlet groups provide battery backup power to connected equipment 24
- Overview 24
- Caution 25
- Emergency power off 25
- Normally closed contacts 25
- Normally open contacts 25
- Overview 25
- Features 26
- Introduction 26
- Network management interface 26
- Ip address configuration 27
- Related documents 27
- Definitions 28
- End of useful life 28
- Features 28
- Maintenance 28
- Smart battery management 28
- Recommended actions after installing new rbcs 29
- Replace the rbcs in a ups 29
- Xlbp installation and replacement 29
- Problem and possible cause solution 30
- Troubleshooting 30
- Ups does not provide expected backup time 30
- Ups emits an audible alarm 30
- Ups will not turn on or there is no output 30
- Problem and possible cause solution 31
- Ups display interface is red or amber and shows an alert or warning message the ups emits a sustained audible alarm 31
- Ups display interface status screen shows overload and the ups emits a sustained audible alarm 31
- Ups display interface status screen shows ups is operating in bypass mode 31
- Ups operates on battery power while connected to mains power 31
- Bypass 32
- Output off 32
- Output overload 32
- Power sys error 00100 contact customer support 32
- Problem and possible cause solution 32
- The replace battery alert is displayed 32
- The ups display turns red or amber displays an alert message and emits a sustained audible alarm red illumination indicates a ups alarm that requires immediate attention amber illumination indicates a ups alarm that requires attention 32
- A note the model number and serial number and the date of purchase the model and serial numbers are located on the rear panel of the unit and are available through the lcd display on select models 33
- A note when shipping within the united states or to the united states always disconnect one ups battery before shipping in compliance with u s department of transportation dot and iata regulations the internal batteries may remain in the ups 33
- B batteries may remain connected in the xbp during shipment not all units utilize xlbps 33
- B call apc support and a technician will attempt to solve the problem over the phone if this is not possible the technician will issue a returned material authorization number rma 33
- C if the unit is under warranty the repairs are free 33
- D service procedures and returns may vary internationally refer to the apc web site for country specific instructions 33
- Service 33
- Transport 33
- Limited factory warranty 34
- 2014 en 990 4505a 35
- Apc by schneider electric worldwide customer support 35
Похожие устройства
- APC smart-ups srt5kxli Инструкция по эксплуатации
- APC back-ups bx500ci Инструкция по эксплуатации
- APC smart-ups srt8kxli Инструкция по эксплуатации
- APC symmetra lx xr 8kva scalable to 16kva sya8k16ixr Инструкция по эксплуатации
- APC surgearrest pm8-rs Инструкция по эксплуатации
- APC smart-ups smc3000i Инструкция по эксплуатации
- APC bx650ci-rs+ power bank Инструкция по эксплуатации
- APC back-ups be700g-rs+ Инструкция по эксплуатации
- APC back-ups bx1400ui Инструкция по эксплуатации
- APC back-ups bx700ui Инструкция по эксплуатации
- APC back-ups bx950ui Инструкция по эксплуатации
- APC back-ups bx650li Инструкция по эксплуатации
- APC back-ups bx650li-gr Инструкция по эксплуатации
- APC back-ups bx800li Инструкция по эксплуатации
- APC back-ups bx1100li Инструкция по эксплуатации
- APC smart-ups smc2000i Инструкция по эксплуатации
- APC Smart-UPS SMT1500I Инструкция по эксплуатации
- APC Smart-UPS SMT2200RMI2U Инструкция по эксплуатации
- APC Smart-UPS SURTD5000XLI Инструкция по эксплуатации
- APC Smart-UPS SURT6000XLI Инструкция по эксплуатации
Скачать
Случайные обсуждения