Smeg P75 [11/14] Regulation of minimum for lpg

Instructions for the installer

5.7 Regulation of minimum for LPG

To regulate the minimum for LPG, completely tighten (clockwise) the screw inside or

next to the gas tap pin (depending on the model).

The diameters of the by-passes for each burner are given in table “5.2 Regulation for

LPG ”.

After regulation for a gas other than that inspected, replace the label on the casing

with one for the new gas. The label is inside the bag that contains the nozzles.

5.8 Arrangement of burners on hob

BURNERS

Auxiliary

Semi rapid

Medium rapid

Large rapid

If the flame of the UR burners have unstable flame (the ring does not ignite or has

difficulty igniting), clean the perforated ring carefully to remove any residues deposited

in the holes. If the problem persists after this cleaning, contact an authorised service

centre.

5.9 Lubrication of gas taps

After a while, the gas tap may become hard to turn or lock. If this happens, it has to be

cleaned inside and re-greased.

This must be done by a qualified technician.