Beko CSE 63120 GW [14/88] Gas conversion

Содержание

Похожие устройства

The supply cable of the appliance must correspond to the specifications see technical data table Technical Data page 5 A Risk of explosion by damage of the safety tube The safety tube must not be clamped bent or trapped or come into contact with hot parts of the appliance G1 The plug should be easily accessible after installation but not above the hob Plug the mains lead into the socket Connection to the mains supply Q This appliance must be earthed Our company shall not held responsible for any damage caused by using the appliance without earthed socket A Risk of electric shock short circuit or fire by unprofessional installation The appliance may be connected to the mains supply only by an authorized qualified person and the appliance is only guaranteed after correct installation A Risk of electric shock short circuit or fire by damage of the mains lead The mains lead must not be clamped bent or trapped or come into contact with hot parts of the appliance If the mains lead is damaged it must be replaced by a qualified electrician The mains supply data must correspond to the data specified on the rating plate of the appliance The rating plate is either seen when the door or the lower cover is opened or it is located at the rear wall of the appliance depending on the appliance type A Risk of electric shock Before starting any work on the electrical installation please disconnect the appliance from the mains supply Position appliance up to the kitchen wall To align the appliance with the worktop adjust the feet turning right or left hand as required Final check 1 Check electrical functions 2 Turn on gas supply 3 Check gas installations for secure fitting and tightness 4 Ignite burners and check appearance of the flame The flames should be blue and burn smoothly If the flames appear yellowish check secure position of the burner cap or clean the burner Switch off gas and let burner cool before touching it Gas conversion A Risk of explosion Before starting any work on the gas installation please shut off the gas supply In order to change your appliance s gas type change all injectors and 13 EN