Bomann gb 388 [5/14] Conditions for the installation conditions for the installation conditions for the installation conditions for the installation location location location location

Unpacking the appliance

Unpacking the appliance Unpacking the appliance

Unpacking the appliance

1. Remove the appliance from its packaging.

2. The device and parts of the interior are protected for transport. Remove all adhesive tapes from the

unit door. You may remove adhesive residue with a cleaning solvent. Also remove any adhesive

tapes and packaging materials from the inside of the device.

3. To prevent hazards, check the appliance for any transport damage.

4. In case of damage, do not put the device into operation. Contact your distributor.

NOTE

NOTENOTE

NOTE:

Production residue or dust may have collected on the appliance. We recommend cleaning the appli-

ance according to chapter “Cleaning”.

Overview of the appliance

Overview of the applianceOverview of the appliance

Overview of the appliance

NOTE

NOTENOTE

NOTE:

The drawing can deviate from the original device.

Delivery scope

Delivery scopeDelivery scope

Delivery scope

1 x ice-cube tray

Installation

InstallationInstallation

Installation

Conditions for the installation

Conditions for the installation Conditions for the installation

Conditions for the installation location

location location

location

• Sufficient ventilation around the device is necessary in order for the heat to dissipate properly and

to guarantee efficient cooling operation at low power consumption. For this purpose, leave suffi-

cient space around the device.

- minimum distance of 7,5 cm between rear side and wall;

- at least 10 cm on both sides;

- and on top of the device 10 cm.

- Leave proper space in front of the device in order to open the door at an angle of 160°.

1 Adjustable thermostat

2 Compressor

3 Device door

4 Fixed grid shelf