Bomann gb 388 [7/14] Startup operation startup operation startup operation startup operation

1. Use a flat thin-blade screwdriver to remove the blind plug (1) and the hinge cover (2).

2. Tilt the device slightly backwards and block it in this position.

3. Dismount the upper door hinge (4) by unscrewing the screws (3).

4. Open the door a little and take it carefully from the lower door hinge (5). Shift the blind plug (9) at

the other device side. Place the door on a padded surface to prevent it from scratches.

5. Dismount the lower door hinge (5) incl. foot (7) by unscrewing the screws (6).

6. Screw the separate foot (8) off.

7. Transfer the lower hinge (5) incl. foot (7) at the opposite device side and fix it with the screws (6).

8. Screw the separate foot (8) at the corresponding opposite side in again.

9. Replace the device in the upright position again. Insert the device door on the hinge pin of the low-

er door hinge (5) and fix the door at the allocated position.

10. Attach the upper door hinge (4) by using the screws (3) at the corresponding opposite device side.

11. Put the blind cap (1), which has been removed at the beginning, to the uncovered hole at the op-

posite side. Clip the hinge cover (2) on again.

12. Check if the door is arranged vertical as well as horizontal, so that a smooth opening and closing of

the door is ensured.

Startup / Operation

Startup / OperationStartup / Operation

Startup / Operation

Prior to first use

Prior to first usePrior to first use

Prior to first use

CAUTION:

CAUTION:CAUTION:

CAUTION:

After transport, the device should be left standing for 4 hours in order for the oil to be collected in the

compressor.

Nonobservance could cause damage to the compressor and hence result in failure of the

device. This would void your warranty claim.

• Clean the interior of the device including all accessory parts located inside. Please consider the

instructions that we have included for you in the chapter on “Cleaning”.

1 Blind plug

2 Hinge cover

3 Screws

4 Upper door hinge

5 Lower door hinge

6 Screws

7 Foot

8 Separate foot

9 Blind plug