Netis ST3208 [5/42] Chapter 2 mounting device

Chapter 2: Mounting Device

2.1 Installation Precautions

Ensure the surface on which the device is placed is adequately secured to prevent it from

becoming unstable Ensure the power outlet is placed within 1.8m (6feet) of the device. Ensure

the device is connected safely to the power outlet with the AC power cable. Ensure the device

around good ventilation and heat dissipation

Do not place heavy objects on the device

2.2 AC POWER

The switch can be used with AC power supply 100 to 240V AC, 50 to 60Hz. Switch built-in power

supply system can be the actual input voltage automatically adjusts its operating voltage. The

power connector is located on the rear panel switch.

Disconnect the power cord is a plug on the power switch on the rear panel interface, the other

end plugged into a power outlet.

Chapter3: Login The Device

You can use the web browser-based configuration to manage ST3208. ST3208 to be configured

through a web browser, at least a reasonable allocation of computer through an Ethernet

connection to ST3208.

Figure 3-1

The machine-default IP address is 192.168.2.11, subnet mask is 255.255.255.0. So when you log

on to the switch, make sure the IP address of the computer network card and the IP of the switch