Netis WF-2402 WF-2402D [2/10] Led indicators

 Connect another Ethernet cable from your Cable/DSL modem to the WAN port of your

router.

 Connect the single DC output connector of the power adapter to the power jack on the back

of the router and plug the Power Adapter into an AC outlet.

4. LED Indicators

Figure 4-1

LED

Function

PWR

Power on

WPS

Flashing slowly

WPS is running

SYS

Flashing

Normal

WLAN

Flashing

Wireless data transmitting

WAN

WAN Connection normal

Flashing

Data transmitting

LAN

Corresponding LAN port connection normal

Flashing

Corresponding LAN port data transmitting

5. Configure Your Computer

You can manage the 150Mbps Wireless-N Broadband Router through the Web browser- based

configuration utility. To configure the device via Web browser, at least one properly configured

computer must be connected to the device via Ethernet or wireless network. The Router is

configured with the default IP address of 192.168.1.1 and subnet mask of 255.255.255.0 and its

DHCP server is enabled by default.

Here we use Windows XP for example. If your network settings are not already set and you

need to complete this step, the configurations are similar for the other operating systems.

 Open My Computer on your desktop or through the Start menu, right click on My Network

Places in the Other Places menu to the left and select Properties. Right click on your Local

Area Connection in the window that appears and select Properties. In the properties window

that appears, under “This connection uses the following items:” select Internet Protocol

(TCP/IP) and then click the Properties button below.