Netis WF-2402 WF-2402D Инструкция по установке онлайн [5/10] 151253

Figure 7-1

 You may already be connected to the Internet. Click on “System Information”- “Internet

access info” to see if you have an IP, Gateway, etc (refer to the following picture). If not, your

service provider probably requires you clone the MAC address of your computer to the outer.

To do so, click on “Internet Setup” in the menu, then click on “Clone MAC Address” button

to get your computer's MAC address in according to your Internet connection type, and then

click the “Save” button below.

Figure 7-2

 If you are still not connected, or experience an erratic connection, your modem may have the

same IP as the router (192.168.1.1). You will need to change the router's IP. Click on “LAN

Setup”- “LAN IP Address” and you will see this IP in the main interface. You may edit it to

something different (192.168.2.1 for example). After entering the new IP, click on “Save”

below, the router will reboot, and you will need to enter the user name and password again.

Check your system status for IP again, and test connection.

 Note: You will need to enter the new IP in the browser to access the user interface for any