Epson EH-DM2 [5/36] Storing

4

Remove the screen first. If the stand is folded before removing the screen, it could fall and cause an injury.

1

Remove the screen.

1

Pull up the adjuster lever and lower the extension pole. Push down the adjuster lever after

lowering the extension pole.

2

Remove the shafts in reverse of the way they were installed.

Install the screen.

* The screen is wrapped around a core for transportation. Remove the core and discard it.

* The white part of the screen should be completely dried before shipping. When you use the screen for the

first time, you may notice a slight chemical odor. This odor will disappear while you use the screen. If the

odor is too strong, open up a window to ventilate the room and allow it to dry for a few days.

3

Store the stand.

1

Pull the shafts straight out from the holder. Hold the stand securely with one

hand.

Store the stand first, then the shafts, and stabilizer in that order. Make

sure the hooks at the tips of the shafts are facing outward.

* Store the screen, stand, and shafts correctly.

1

Hook the screen on either side of two

shafts and spread the screen. The white

surface should be in front.

5

the extension pole.

* Raise the extension pole slowly when adjusting the height.

Be careful not to pull it too far or it may come out.